Instructions

25
1 800 463-7043 • www.globalcommander.ca
FEATURES
INSTALLATION
Designed for indoor and outdoor use, 120V preassem-
bled heating cables for pipe freeze protection help to
prevent damage from winter weather.
Approved for residential, commercial and industrial
installations, it must be plugged into a 120V outlet tted
with a ground fault circuit interrupter (GFCI). The cable
allows for moderate bends (minimum bend radius of
5/16 in. (8 mm)).
For optimal performance,
the cable must be installed
at on a metallic or non-
metallic pipe and covered with insulation no more than
1/2 in. thick (13 mm).
PEACE OF MIND
The cable is tted with a
built-in bimetallic thermostat
that activates the cable when
the temperature falls below
4 °C (40 °F) and a grounded
3-pronged plug with an indi-
cator light to show when the
cable is powered on.
Once the cable has been
installed and powered on,
no further action is required
throughout the winter season!
Do not cut or try to shorten the cable.
Single Cable Mounting Dual Cable Mounting