Use Instructions

Page | 7
FEATURES OF LYNQ PRO
• Rapidly Deployable Self-Contained Network
• Provides Position Location Information (PLI) Up to 12 Users
• Route Navigation
• Team movement data
• Networked user data
o Speed / Elevation / heading
o GPS location
o Orientation and distance device to device
• Markers
o Orientation and distance device to marker
o GPS location of marker
• Device to Device or Device to Network messaging
• ATAK compatible
o ATAK Transmit/Receive Capabilities
o ATAK plug in available
General Specifications
• Dimensions: 4.2 x 2.3 x 1.1 in. [107 x 58 x 28 mm]
• Supply Voltage (main): 2.0 V to 3.3 V
• Supply Voltage (Tx gain): 2.0 V to 4.8 V
• Weight: 0.5 lbs. [0.23 kg]
• Current Consumption, Tx: varies, 600 mA max
• Current Consumption, Rx: 57 mA
• Current Consumption, Disable: 500 nA
• Antenna Pin Impedance: 50 Ω
Network Stack Specifications
• Maximum Encryption: AES-256
• Network Type: Peer-to-peer broadcast, unicast
• Maximum bitrate: 7.3 kbps
• Maximum payload size: 246 bytes
Radio Specifications
• Modulation: CSS (LoRa)
• Frequency Range: 902-928 MHz
• Channel Spacing: 41.6 kHz, 62.5 kHz, 128 kHz, 250
kHz
• Channel Bandwidth: 20.8 kHz, 31.25 kHz, 62.5
kHz, 125 kHz
• Link Budget: Up to 163 dB
• Receiver Sensitivity: As low as -133 dBm
• Adjacent Channel Selectivity: 90 dB
• Power Output: Up to 1 W
• Frequency Stability: ±30 ppm or less
PHY Layer Specification
• Peripheral: Serial UART
• UART Spect: 8N1
• Baud Rate: 115200 (default)
• Other Baud Rate: TBD
• Timeout (Bad Msg): 44 ms
• Wait after Power On: 1 sec
• Maximum Payload Size: 252 bytes
• Stack API Overhead: 3 bytes
DRAFT