Operation Manual

84
Check required Before
starting
Monthly Quarterly
Function test of the wheel locks/brakes
X
Sag of seat and back upholstery
X
Checking the setting of the caster journal
bearing
X
Visual examination of wearing parts (e.g. tires,
bearings)
X
Contamination on bearings
X
Push rings for damages
X
Air pressure (printed on the sidewall of the tire)
X
Folding mechanism for wear
X
Checking the spoke tension of the rear wheels
X
Checking the screw connections
X
Should any defects become obvious, please contact your authorized dealer to rectify them.
We also recommend you to have your wheelchair serviced by your authorized dealer every three
months.
Cleaning
To clean your wheelchair, use a mild detergent and a soft cloth.
Certain components can be easily maintained by yourself so as to ensure smooth operation of
your wheelchair:
• Hair and/or dirt particles may accumulate between the caster wheel and fork, this can
restrict the caster wheels from rotating smoothly. Thoroughly clean between the fork and
caster wheels/axle using a soft cloth and if required a mild detergent.
• The rear wheels and caster wheels can be supplied as a quick-release axle system.
To keep this system operational, ensure no dirt/grit adheres to the quick-release axle or
axle housing. Lightly lubricate the quick-release axle regularly with resin-free sewing
machine oil.
• If your wheelchair gets wet, towel dry it as soon as possible.
• Do not use your wheelchair in salt water, as sand, salt and/or other particles will cause
corrosion and cause damage to wheel bearings.
• Check the tightness of all screw connections regularly. If any screw connection persists in
becoming loose, consult your authorized dealer immediately!