Operation Manual

The anti-tipper can now be adjusted to the position of your rear wheel. After the screw connection

has been loosened, the anti-tipper can be horizontally and vertically adjusted.

The anti-tipper wheel must at least completely extend from the rear wheel to the back, and the

distance between the wheel and ground should not exceed 5 cm maximum (Fig. 13). Find the

appropriate position with the assistance of a helper!

Make sure to firmly retighten all screws and nuts after making adjustments.

First remove the screw (Fig. 77, item a) from the footrest bar. To change the lower leg length,

you can now choose one of the upper or lower threaded holes in the footrest bar and screw

together the two components. Depending on the adjustment, it may be necessary to remove one

or several of the spacer sleeves (Fig. 77, item b).

Ensure to firmly re-tighten all screws and nuts after making adjustments.

AttachingtheSafetyLapBeltThe attachment point

for the safety lap belt is in the upper most hole on

each side of the rear frame.

Height Adjustment of the Elevating Footrests

with Automatic Length Adjustment

76 77