User Manual

• Select the ‘Devices’ button at the bottom left of the screen.
• To add a device, select the ‘+’ symbol in the upper right hand corner of your
mobile phone or tablet screen.
• Select ‘Smart Lighting’.
• Select ‘Lighting devices’, a flashing light bulb icon will appear on your mobile
phone or tablet screen.
• Turn on the lamp.
• With the lamp on, touch and hold the “on/off” button on the actual lamp for 5
seconds to pair. The LAMP should now be RAPIDLY blinking fast, if not follow the
directions on how to make the actual lamp blink fast– see directions on your
mobile phone or tablet screen.
• If theLAMP is RAPIDLY blinking, select the “confirm light blinks rapidly’ button on
your mobile phone or tablet.
• You will now need to link it to Wi-Fi -- follow the directions, enter in the Wi-Fi
password for your wireless network, select the ‘confirm’ button on your mobile
phone or tablet.
• You should now see “Device Successfully Added” on the screen. The lamp will
be listed.
• Select the edit icon and name your device/lamp.
• Select ‘done’.
5. Open the Google Home app to add the lamp you just setup in the Smart Life app.
• Go to the home page.
• Select “+ add ” on the home screen.
• Select ‘+ set up device’.
• Select ‘ have something already setup’.
• Scroll down and locate the “Smart Life” app and select the icon.
• Enter in your phone number/email address and password, select ‘link now’.
• Select “Authorize”.
• The lamp should be listed.
• Choose a home.
• Assign a room - where the lamp is located.
• Assign a nickname to the lamp, if desired.
• You can now use the voice activation feature to control the lamp.
NOTE: if at any point the lamp seems to stop following commands or malfunctions,
simply turn the lamp off, wait 5 seconds or unplug the lamp from the electrical
connection for 1 minute; plug back in and turn lamp back on. The lamp will be reset.
Verbal Command Suggestions:
“Hey Google, turn on the ‘name you gave the lamp’ light.”
“Hey Google, turn off the ‘name you gave the lamp’ light.”
“Hey Google, turn the ‘name you gave the lamp’ brightness 10%.”
“Hey Google, turn the ‘name you gave the lamp’ brightness to 80%.”
“Hey Google, turn the ‘name you gave the lamp’ brightness to 100%.”
If you have more than one lamp assigned to a room, you can turn on and off
the lamps at the same time:
“Hey Google, turn on the ‘room you assigned the lamps to i.e., family room, kitchen’
lights.”
If the lamp has multiple color temperatures:
“Hey Google, turn the ‘name you gave the lamp’ to ‘cool white’.”
“Hey Google, turn the ‘name you gave the lamp’ to ‘warm white’.”
SAFETY WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK,
OR INJURY TO PERSONS
1. Turn lamp off and WAIT UNTIL LAMP HEAD (D) IS COOL before handling.
2. The LED panel (E) might get hot after several hours of continuous use DO NOT
place your hands directly on LED light panel.
3. Never use with an extension cord unless the plug can be fully inserted into the
receptacles in the extension cord.
4. Do not alter the plug.
5. The lamp head included with this unit cannot be replaced by the consumer.
6. INDOOR USE ONLY.
NOTE: The important safety instructions appearing in this instruction sheet are not meant
to cover all possible conditions and situations that may occur. It must be understood that
common sense, caution, and care must be used with any electrical product.
CAUTION! DEVICE MAY BECOME WARM DURING CHARGING. THIS IS NORMAL
AND PART OF THE PROCESS. CHARGING TIMES VARY BY DEVICE.
CAUTION! IF THE EXTERNAL FLEXIBLE CABLE OR CORD OF THIS LUMINAIRE IS
DAMAGED, IT SHALL BE EXCLUSIVELY REPLACED BY THE MANUFACTURER OR ITS SERVICE
AGENT OR A SIMILAR QUALIFIED PERSON IN ORDER TO AVOID A HAZARD. INDOOR USE
ONLY.
CAUTION! THE LIGHT SOURCE OF THIS LUMINAIRE IS NOT REPLACEABLE; WHEN
THE LIGHT SOURCE REACHES ITS END OF LIFE THE WHOLE LUMINAIRE SHALL BE REPLACED.
FCC PART 15
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that the interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
CAN ICES-005 (B)/NMB-005 (B)
CAUTION: Any change or modification to product not expressly recognized by
OttLite Technologies voids OttLite’s responsibility for proper function of product.
POWER ADAPTER SPECIFICATION:
Input: AC 100-240V, 50/60 Hz, 0.8A
Output: 15V DC, 1.4A with a Male DC Plug
THIS LAMP CONTAINS a 5V, 2,1A USB output port (J) located on the bottom rear of
lamp. USB port can charge items such as tablets, cellular phones, etc.
Amazon, Alexa and all related logos are trademarks of Amazon.com, Inc. or its affiliates.
Google Home and Google Assistant are trademarks of Google, Inc.
INS190501 REV050719