Operating Instructions

CONGRATULATIONS!
You’ve purchased the finest in natural lighting technology with your new OttLite
®
product.
WARNING: To prevent electric shock, make sure the lamp is not plugged in until all
steps are complete.
PRODUCT REGISTRATION FORM
Please complete the enclosed Product Registration Form and return it today by mail, or
register online by going to: OttLite.com/warranty
NOTE: THIS UNIT IS FULLY ASSEMBLED
1. Remove lamp from packing, placing lamp body base (A) flat on a steady surface.
2. Connect power adapter input (F) into connector (G) in the rear-bottom of the lamp.
3. Plug the power adapter (H) into a standard household 120V AC outlet. Note: Only
use with the supplied power adapter to avoid damage or fire.
4. Turn the lamp ON/OFF by using power switch (B) located on top of base (A).
5. Touch panel (B) includes multiple “touch” keys that control the lamp’s light color
mode and brightness within each color mode. This lamp provides five levels of
brightness. See
Touch Key Instructions section for operating instructions.
6. To reposition the light, hold the lamp base (A) steady and grasp either lamp body (C)
or shade (D) depending on needed adjustment.
7. Refer to diagrams 1,2,3,4 for lamp maximum adjustment range. NOTE: DO NOT
FORCE the shade or lamp body outside indicated adjustable range as excessive
adjustment may cause damage.
TOUCH KEY PANEL INSTRUCTIONS:
To power lamp and operate LED settings, slightly touch required “key” to achieve the
following:
•฀Turn฀lamp฀“ON/OFF”:฀touch฀“POWER”฀key฀(B)฀as฀needed.
•฀To฀adjust฀brightness:฀touch฀“UP”฀key฀(K)฀or฀“DOWN”฀key฀(L)฀as฀needed.
•฀To฀adjust฀lighting฀color฀mode:฀touch฀“M”฀key฀(M)฀to฀switch฀light฀color฀mode;฀
฀฀฀2700K°,฀4000K°,฀5000K°.
GOOGLE HOME LAMP VOICE ACTIVATION INSTRUCTIONS:
NOTE 1: The Google Home Lamp Voice Activation feature will only operate on a
2.4GHz wireless network.
NOTE 2: If you already have Google Home set up, the prompts you will receive may
vary from the details below.
1. Plug both the lamp and the Google Home device into an electrical outlet.
2.
Download the free Google Home app from your app store on your mobile phone or
tablet. Once the app has downloaded, ‘open’ the app.
•฀Follow฀the฀prompts฀for฀“getting฀started”฀at฀the฀bottom฀of฀the฀screen฀on฀your฀
mobile phone or tablet.
•฀You฀will฀need฀to฀create฀an฀account฀and฀password฀to฀use฀this฀app.฀Follow฀the฀app’s฀
prompts to create an account.
•฀Once฀the฀account฀is฀created,฀the฀app฀will฀need฀to฀verify฀your฀information฀by฀
sending a verification code to your email account.
•฀Enter฀in฀the฀verication฀code฀from฀your฀email฀into฀the฀app.
•฀Agree฀to฀the฀terms.
•฀Now฀the฀Google฀Home฀app฀starts฀‘Looking฀for฀Devices”
•฀Press฀the฀“next”฀button฀and฀‘Google฀Home’฀will฀connect฀to฀the฀device.
•฀You฀should฀hear฀a฀sound฀from฀the฀device฀indicating฀that฀you฀are฀now฀connected.
•฀Choose฀a฀location฀for฀this฀device.฀
•฀Choose฀your฀Wi-Fi฀network.฀
•฀Link฀to฀your฀Wi-Fi฀network฀by฀entering฀in฀your฀network฀password.
•฀Depress฀‘next’฀฀or฀you฀can฀‘฀learn฀more’฀when฀prompted฀“Before฀using฀your฀
Google Assistant”.
•฀Follow฀prompts฀to฀set฀up฀voice฀match.
•฀Enter฀in฀your฀address.
•฀‘Almost฀done!’฀prompt฀depress฀“next”.
•฀You฀should฀now฀have฀a฀“Google฀Home฀฀is฀฀ready”฀message,฀depress฀‘continue’.
•฀The฀Google฀Home฀device฀should฀now฀speak฀to฀you.
•฀Continue฀past฀the฀next฀couple฀of฀screens
•฀“Welcome฀Home”฀screen฀-฀฀฀you฀can฀browse฀here฀if฀you฀like.
•฀Agree฀to฀the฀terms.
•฀Turn฀on฀the฀settings.
•฀Then฀repeat฀the฀messages฀on฀the฀screen฀and฀the฀Google฀Home฀device฀will฀now฀
recognize your voice – depress ‘continue’.
•฀Once฀completed฀you฀need฀to฀add฀devices,฀but฀before฀you฀can฀do฀this฀you฀must฀rst฀
download and register the Smart Life App.
3. Download the free Smart Life – Smart Living
app from your app store
on your mobile phone or tablet. Once the app has downloaded ‘open’ the app.
•฀Follow฀the฀prompts฀for฀“registering”.
•฀You฀will฀need฀to฀enter฀in฀your฀mobile฀phone฀number฀and฀a฀verication฀code฀will฀be฀
texted to you and create a password to use this app. Follow the app’s prompts to
complete this.
•฀Depress฀the฀‘Devices’฀button฀at฀the฀bottom฀left฀of฀the฀screen.
•฀To฀add฀a฀device,฀depress฀the฀‘+’฀symbol฀in฀the฀upper฀right฀hand฀corner฀of฀your฀
mobile phone or tablet screen.
•฀Depress฀“Lighting฀devices’,฀a฀ashing฀light฀bulb฀icon฀will฀appear฀on฀your฀mobile฀
phone or tablet screen.
•฀Depress฀and฀hold฀the฀“on/off”฀button฀on฀the฀actual฀lamp฀for฀5฀seconds฀to฀pair.฀฀฀
The lamp should now be RAPIDLY blinking fast, if not follow the directions on how
to make the actual lamp blink fast– see directions on your mobile phone or screen.
•฀If฀the฀lamp฀is฀RAPIDLY฀blinking฀,฀depress฀“conrm฀light฀blinks฀rapidly’฀button฀on฀
your mobile phone or tablet.
•฀You฀will฀now฀need฀to฀link฀it฀to฀Wi-Fi฀--฀follow฀the฀directions,฀enter฀in฀the฀Wi-Fi฀
password, depress the ‘confirm’ button on your mobile phone or tablet.
•฀You฀should฀now฀see฀“Successfully฀Added฀1฀Device”฀on฀the฀screen.฀The฀lamp฀will฀
be listed.
•฀Depress฀the฀edit฀icon฀and฀name฀your฀device/lamp.
•฀Depress฀‘done’
4. Open the Google Home app to add the lamp you just setup in the Smart Life app.
•฀Go฀to฀the฀home฀page.
•฀Depress฀“Home฀Control”฀on฀menu฀screen.
•฀Depress฀“Devices”.
•฀Depress฀“+”฀in฀bottom฀right฀hand฀corner฀of฀the฀screen฀to฀add฀a฀device.
•฀Scroll฀down฀and฀locate฀the฀“Smart฀Life”฀app฀and฀depress฀the฀icon.
•฀Enter฀in฀your฀phone฀number/email฀address฀and฀password.
•฀Depress฀“Authorize”.
•฀The฀lamp฀should฀be฀listed฀under฀“Assign฀Rooms”฀assigning฀a฀room฀฀-฀assign฀a฀
room for the lamp.
•฀Assign฀a฀nickname฀to฀the฀lamp.
•฀Depress฀“done”.฀
•฀You฀can฀now฀use฀the฀voice฀activation฀feature฀to฀control฀the฀lamp.
NOTE: if at any point the lamp seems to stop following commands or malfunctions,
simply฀turn฀the฀lamp฀off,฀wait฀5฀seconds฀and฀turn฀back฀on.฀The฀lamp฀will฀be฀reset.
5. Verbal Command Suggestions:
“Hey Google, turn on the ‘name you gave the lamp’ light”
“Hey Google, turn off the ‘name you gave the lamp’ light”
“Hey Google, turn the ‘name you gave the lamp’ brightness 10%”
“Hey Google, turn the ‘name you gave the lamp’ brightness to 80%”
“Hey Google, turn the ‘name you gave the lamp’ brightness to 100%”
If you have more than one lamp assigned to a room, you can turn on and off
the lamps at the same time:
“Hey Google, turn on the ‘room you assigned the lamps to i.e., family room, kitchen’
lights”.
If the lamp has multiple color temperatures:
“Hey Google, turn the ‘name you gave the lamp’ to ‘cool white’.”
“Hey Google, turn the ‘name you gave the lamp’ to ‘bright white’.”
“Hey Google, turn the ‘name you gave the lamp’ to ‘warm white’.”
SAFETY WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK,
OR INJURY TO PERSONS
1. Turn lamp off and WAIT UNTIL LAMP HEAD (D) IS COOL before handling.
2. The LED panel (E) might get hot after several hours of continuous use DO NOT place
your hands directly on LED light panel.
3. Never use with an extension cord unless the plug can be fully inserted into the
receptacles in the extension cord.
4. Do not alter the plug.
5. The lamp head included with this unit cannot be replaced by the consumer.
6. INDOOR฀USE฀ONLY.
ENGLISH Command LED Desk Lamp with Voice Assistant
E
Command LED Desk Lamp with Voice Assistant
CS59029 CS59029-SHPR T11FS
J
INS180455 REV022119
D
B
A
G
F
H
B
K L M
Diagram 2Diagram 1
150°
90°
180°
45° 45°
Diagram 3 Diagram 4
C