User Guide

USER MANUAL - GALATEA
•
Wireless Output Watch 5W
•
Total Output: 20W Max
•
Frequency:
o
326.5 kHz
o
1.778 MHz
•
Operating Temperature: Charging: 10 to 40°C |50 to104°F; Discharging: -10 to 40°C | 14 to
104 °F
COMPATIBLE PRODUCTS
For use with Apple Watch
SETUP
Fully charge Power Bank before first use with the included cable.
While charging, the display continually shows battery capacity as follows:
• 1 flashing LED = < 25% capacity
• 1 solid LED, 1 flashing LED = 25-50% capacity
• 2 solid LEDs, 1 flashing LED = 50-75% capacity
• 3 solid LEDs, 1 flashing LED = 75-99% capacity
• 4 solid LEDs = 100% capacity
When not charging, press the button to view capacity:
• No LEDs = 0% capacity
• 1 flashing LED = 0-10% capacity
• 1 solid LED = 10-25% capacity
• 2 solid LEDs = 25-50% capacity
• 3 solid LEDs = 50-75% capacity
• 4 solid LEDs = 75-100% capacity
WIRELESS CHARGING
1. Attach Apple Watch to the magnetic charging connector on Power Bank.
2. Press the button at the top to turn on Power Bank
3. Charge indicator appears in the watch screen, and the first Power Bank LED displays green
during charging.
4. Power Bank auto-stops charging when the watch is full.
5. To manually stop charging, press and hold the button.
Note: The wireless output is automatically enabled when connected to a power source.
DUAL-DIRECTION CABLE CHARGING
• To charge a device with Power Bank via a USB-C cable:
o Plug the cable into Power Bank and then into the device.
o Charging starts automatically. If it does not, press the button to initiate charge.
• Recharge Power Bank with a USB-C cable and charger.