Users Manual

PRODUCT INFORMATION
Pull-force measurement system
2 PRODUCT DESCRIPTION
2.1 FUNCTION
The pull-force measurement system POWER-CHECK measures the pull-force in power drawbars.
The pull-force measurement system is embedded in the tool holder. The force occurring after the
clamping process is detected by the measurement system.
It is possible to use the measuring device in a tool magazine.
The measuring device sends the measuring value to the receiving device.
2.2 DIMENSIONS
L / D → VARIATIONS # 2.5 // 8
2.3 FEATURES
Pull force measuring mechanism integrated in base unit
no power connection required
useable in tool magazines; thereby at all times applicable
wireless transmission of the measuring values
automatic activation due to permanent clamping force detection
95100422PE_2020-09-22
Subject to modification due to technical advance! // 6
L
ø 63 ø 40
D