User's Manual

CHAPTER3
Returnederrorslist
50
• raw_cabl2 is the raw value read on cabling 2 by the analog-digital
converter.
• raw_cabl3 is the raw value read on cabling 3 by the analog-digital
converter.
• cnt is the current value of the counter.
Note: The braces, {...}, show that this part may repeat, depending on the
device type. For an RA440 the output will show the logical channels 0,
1, and 2.
REMOTE Yes.
EXAMPLE # ximme 2
441 ximme
0 129 0 54 0 0
1 1 22272 0 0 0
2 1 22208 0 0 0
0
#
Returnederrorslist
Following are error messages you might get.
Commandlineinterpreter
• 1 — nonexistent command
• 2 — command line buffer overflow (input line too long)
• 3 — internal error
• 4 — reserved
• 5 — missing or false parameters in command
• 6 — operation not implemented
• 7 — remote operation not allowed
• 8 — invalid IMEI Number
• 9 — command not supported in this configuration
Devicedescriptorandstoragehandler
• 10 — device not found (attempt to perform a command on a
nonexistent device)
• 11 — device already exists
• 12 — reserved
• 13 — no more space for descriptors (too many devices)
• 14 — no more records for the specified device
• 15 — temporary communication break, no more data (the last
request was not successful)
• 16 — time-out (the handler blocked or is busy)
• 17 — internal error