User's Manual
CHAPTER3
Usingterminalcommands
41
GSMPUK
A
VAILABLE FOR RA440
DESCRIPTION Sets a new PIN-code for the SIM-card or returns the SIM-card unlock
state.
PARAMETERS The PUK-code and the new PIN-code, or none (for SIM-card check).
REMARKS GET/SET.
RETURNS Refer to the command GSMPIN.
REMOTE No.
EXAMPLE # GSMPUK
441 GSMPUK Ready 0
#
# GSMPUK 56789 1234
441 GSMPUK 0
#
GSMSQ
A
VAILABLE FOR RA440
DESCRIPTION Returns the signal quality and the bit error rate of the used cellular
network.
PARAMETERS None.
REMARKS GET only. The command works only if no GPRS connection has been
established. If a GPRS connection has been established, use GSMSTAT
instead.
RETURNS The signal quality parameter.
REMOTE No.
EXAMPLE # GSMSQ
441 GSMSQ 31 99 0
#
GSMSTAT
A
VAILABLE FOR RA440
DESCRIPTION Displays the status of the GSM module.
PARAMETERS None.
REMARKS GET only.
RETURNS A list of various status information of the current module state.