User's Manual
CHAPTER2
Installingtheremotewirelessmodem
12
2. Locate the SIM card holder and open it by sliding it as indicated in
Figure 5.
Figure 5. Open the SIM Card Holder
3. Raise the holder top and slide the SIM card into it (see Figure 6).
Figure 6. Insert the SIM Card into the Holder
4. Snap the holder top back on and slide it back as shown in
Figure 7.
Figure 7. Close the SIM Card Holder
5. Close the lid, taking care that the rubber gasket seal is inside its
track and free of dust or dirt.
6. Put the four screws back in place, applying moderate force,
tightening crosswise. Be sure not to overtighten the screws or
leave them too loose. For additional information, please contact