User's Manual

Using terminal commands

input and then an MFR (monostable function) was issued, the port automatically

switches to output. A new MFR or similar function clears the status of the port and

starts from scratch, even if the previous command was not finished.

The A733 cannot issue the PORT command remotely, but can execute it.

XAMPLE For RDP:

PORT 0

9193 PORT 0 1 0

For RDDR:

PORT 16

9193 PORT 16 0 0

For ENOPC:

PORT 112

9193 PORT 112 0

For RPNNER:

PORT 128

9193 PORT 128 0 1 0

For RNS:

PORT 80

9193 PORT 80 7/5/1999 18:34:22 0

AVAILABLE FOR

A731 A733A732 A733GSM

ESCRIPTION Switches the unit to permanent receive mode (for tuning purposes).

ARAMETERS None.

ETURNS Nothing.

EMARKS The system stops, and exits the command only when a key is pressed. This

command returns no message.

EMOTE No.

XAMPLE RX

9193 RX 0

AVAILABLE FOR

A731 A733A732 A733GSM

ESCRIPTION Switches the unit to transmit mode (for tuning purposes).

ARAMETERS None (sends an unmodulated carrier), 1 (sends a 1 kHz modulated carrier), 0

(sends a 2 kHz modulated carrier) or 5 (sends a mixed 1 + 2 kHz modulated

carrier).

ETURNS Nothing.