User's Manual

Table Of Contents
CHAPTER 3
Returned errors list
37
REMOTE Yes.
EXAMPLE #12800 datasdi
12800 datasdi 16 5 2003 20 14 49 44 60 255 255 127
87 9 0 9 3 0 0 74.379401 3 0 1 68.117003 3 0 2
58.832397 3 0 3 51.611795 3 0 4 38.346400 3 0 5
19.800799 3 0 6 14.895999 3 0 7 3.553500 3 0 8
0.037200 2953 0
#
SDA
DESCRIPTION Sets/returns the maximum delay for waiting awake (i.e. out of
sleep mode) for a service request of an SDI-12 sensor. This param-
eter is set to 30 seconds by default. A larger value may lead to
higher power consumption. This should be used in cases an SDI-
12 sensor needs large time values to return a sensor result. If you
have such sensors and still want to use them, you need to change
this parameter, but please be aware of the fact that the RTU’s
power consumption will be higher.
PARAMETERS Maximum wake time in seconds (1 to 999).
RETURNS The current value (in seconds).
REMARKS SET/GET.
REMOTE No
EXAMPLE SDA
35385 SDA 30 0
#SDA 50
35385 SDA 0
#
Returned errors list
In the following section you find the error messages you might get.