User's Manual

7
Chapter 2.UsingtheaddSW ITCH
The A724 Series 4 addSWITCH remote telemetry unit (RTU) is part of
the A7xx series. For testing purposes, you should have an A840 or
A850 Telemetry Gateway including the A440 Wireless Modem installed
before you install the A724 Series 4 RTU. For information about
installing the A840 or A850, refer to the device’s user’s guide.
Openingthepackages
The addSWITCH RTU package contains the A724 Series 4 RTU, a valve
connector cable, and a ring clamp. If ordered, the following items
come in separate packaging:
• A solar panel with ring clamp
• A set of aluminum poles
•An LED tool
• Sensors and cables, one box per sensor, and one or several cable
ties in each sensor box
Make sure you have received all the equipment and read through the
instructions that follow. When you are sure you understand them, you
are ready to install your RTU.