User's Manual

CHAPTER3
Usingterminalcommands
37
# SST
41239 SST 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
# SST 5 0 1
41239 SST 0
# SST
41239 SST 0 0 5 0 0 0 0 0 0 0 0 0 0 0 0
#
TIME
D
ESCRIPTION Sets/returns the real time clock.
PARAMETERS The actual time, or none in the GET version.
RETURNS The actual time as dd/mm/yyyy hh:mm:ss.
REMARKS GET/SET.
REMOTE No.
EXAMPLE TIME 10/10/2010 22:10:10
41239 TIME 0
#
TIME
41239 TIME 10/10/2010 22:10:10 0
#
TX
D
ESCRIPTION Switches the unit to transmit mode (for tuning purposes).
PARAMETERS None (sends an unmodulated carrier), 1 (sends a 1 kHz modulated
carrier), 0 (sends a 2 kHz modulated carrier) or 5 (sends a mixed 1 +
2 kHz modulated carrier).
RETURNS Nothing.
REMARKS The system stops, and exits the command only when a key is pressed.
This command returns no message.
REMOTE No.
EXAMPLE TX
41239 TX 0
#
TX 1
41239 TX 0
#
TX 5
41239 TX 0
#