User's Manual

CHAPTER3
Usingterminalcommands
32
• pmp_low and pmp_high are the programmed values with the PMP
command)
• type is used to represent the device type; the following types are
currently assigned:
— 0 for A730MD
— 1 for A720
— 2 for A730SD
— 3 for A720B
— 4 for A733
— 5 for A723
— 6 for A440
— 7 for A733GSM
— 8 for A731
— 9 for A732
— 10 for A740
— 11 for A740GSM
— 12 for A724
— 13 for A725
— 14 for A726
— 15 for A723_S4
— 16 for A724_S4
— 21 for A733GSM_S4
• slot and samples are the actual values programmed by means
of the SLOT command
• po is the power output of the device during the last frame sent
• err_level is the error value; 0 means no error
REMARKS GET only.
REMOTE Yes, GET only. The the A724 can issue the command both remotely
and locally.
EXAMPLE INFO
41239 INFO 0 80 08/05/2009 15:05:55 1.3 0 0 0 77 61 7 1:46
100 65 72 16 60 0 21 0
#
MSTR
D
ESCRIPTION Sets/returns the master receiver setting, which is used for delivery of
notifications.
PARAMETERS The ID of the master receiver.
RETURNS The current master setting.
REMARKS MSTR is used for notifications delivery only, not for time
synchronization.
REMOTE No.