User's Manual

CHAPTER3
TheVALVEConnector
17
Figure 8. A724 Connection with External Battery
If you want to use the internal battery with a different power supply
(charger) than the provided solar panel, disconnect the solar panel
and use the configuration shown in Figure 9.
Figure 9. A724 Connection with External Power Supply
And if you want to use an external battery with a different power
supply (charger) than the provided solar panel, disconnect the internal
battery and solar panel and use the configuration shown in Figure 10.
Figure 10. A724 Connection with External Battery and Power Supply
TheVALVEConnector
The VALVE connector (Figure 11) is used to connect up to four
latching solenoids. The connector is a 6-pin SWITCHCRAFT connector
(EN3P6F, counterpart is the EN3C6M).
The A724 comes with a 0.5m cable with flying ends. A standard
insulating screw joint can be used to connect the solenoid. It is up to
you to protect this insulating screw joint for outdoor usage.
Short
Battery
5
2
4
1
3
+
-
(5.6 to 10 Volt)
Short
Charger
5
2
4
1
3
+
-
(9 to 10 Volt,
100 to 300 mA)
Short
Battery
5
2
4
1
3
+
-
(5.6 to 10 Volt)
Charger
(must fit the
Battery)
+
-