User's Manual

Table Of Contents
CHAPTER 3
Using terminal commands
37
For ENOPC:
6789 PORT 112
6789 PORT 112 0
#
For RPNNER:
6789 PORT 128
6789 PORT 128 0 1 0
#
For RNS:
6789 PORT 80
6789 PORT 7/5/1999 18:34:22 0
#
COMMAND REBOOT
DESCRIPTION This command reboots the RTU and is only available at the con-
sole interface (i.e. not remote).
PARAMETERS The RTU ID
RETURNS Nothing.
REMARKS The system stops, and starts the bootloader after a few seconds. A
new firmware can be uploaded with y-modem protocol using a ter-
minal program. Please follow the instructions on the terminal
screen. To see a list of commands, enter the help command.
REMOTE No.
EXAMPLE REBOOT 38193
A723_S4 Bootloader V1.0
Copyright (C) Adcon Telemetry GmbH 2008
Press <ESC> within 5 seconds to start the command-
line interface...
>
COMMAND XIMME