User's Manual

Table Of Contents
CHAPTER 3
Performing Advanced Functions
32
— 5 for A723
— 6 for A440
— 7 for A733GSM
— 8 for A731
— 9 for A732
— 10 for A740
— 11 for A740GSM
— 12 for A724
— 13 for A725
— 14 for Foreign RTU
— 15 for A723_S4
— 16 for A724_S4
— 17 for A725_S4
— 18 for A731_S4
— 19 for A732_S4
— 20 for A733_S4
— 21 for A733GSM_S4
slot and samples are the actual values programmed by
means of the SLOT command. The
slot
interval shown, is the
shortest one that is nonzero. If all connectors are turned off
(i.e. all slot intervals are zero), the returned value is zero;
sample
will always read zero for A/23 Series 4 RTUs.
err_level is the error value; 0 means no error
REMARKS GET only.
REMOTE Yes, GET only.
EXAMPLE INFO
38193 INFO 255 0 10/10/2008 12:34:56 1.0 0 0 0 91
72 40 1:46 58 65 72 3 900 0 0
#
COMMAND LVA
DESCRIPTION En-/DIsables the low-voltage amplifier for the given ANLG chan-
nels. The bitmask format is the same as for CALC. Note that on
current device types, LVA is only supported on IOB (i.e. channels 3-
5)
PARAMETERS A bitmask. See CALC command syntax.
RETURNS The current setting.
REMARKS GET/SET.