Product Info
INSTALLATION INSTRUCTIONS
MONITOR REMOVAL
MONITOR SPECIFICATIONS
=
INPUT
ELECTRICAL SPECIFICATIONS
DIMENSIONS
OPTION
REPORTING & OUTPUTS
RADIO SPECIFICATIONS
ENVIRONMENTAL SPECIFICATIONS
CERTIFICATIONS
Remote Ready Hall Eect Module, I2C, 4-20mAdc, 0-5 VDC, Temperature
Tank level (5% variation)
0% to 100%
5 years
IP68
Hybrid LTC 3.6 VDC 7.2 VDC
2.38 in 60.34 mm
GPS (mobile tank)
6.28 in 159.62 mm
6 in 152.43 mm
API
4G, LTE CAT1, CATM, NB IOT, 3G
-40°F to 140°F -40°C to 60°C
Network status
Low battery
Email (to supplier and/or consumer)
Dual SIM
Lead sensor status
High/Excessive draw
Raw data
Bluetooth
Battery status
Fill Detection
Online dashboard
Temperature
Client mobile app
Reporting
Relative humidity range
Enclosure rating
Warranty
Battery Pack
Height
Width
Depth
Data Interface
Technologies
Operating & storage temp. range
Monitors are third-party QPS
Evaluation Services Inc. certied
for use in hazardous locations
Class, I, Division 2, Groups C&D
T3; Class I, Zone 2, Group IIB T3;
-40°C to 60°C
Automated Testing
This device complies with part 15 of the FCC Rules. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device is compliant with
Industry Canada’s RSS standards for licence-exempt radio apparatuses. Authorized use depends on the following two conditions: (1) the device must not create radio interference, and (2) the device user must accept all radio
interference, even if this interference could potentially impair its functioning. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving
antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/
TV technician for help.
WARNING: This monitor has been tested and certified safe for use in Class I , Division 2, Groups C & D
T3 hazardous locations. Changes or modifications to the unit must only be performed by an authorized
technician. For outdoor use only. Explosion Hazard - Batteries must only be changed in an area free of
ignitable concentrations. Do not open when an explosive atmosphere is present. Potential electrostatic
charging hazard - wipe only with a damp cloth.
BATTERY REPLACEMENT: Use ONLY the following Otodata replaceable battery packs: G0643-
LF rated 7.2Vdc / 19Ah or G0249-LF, rated 7.2Vdc / 8.5Ah. Battery replacement is to be done
ONLY when an explosive atmosphere is not present. This device provides non-incendive circuits
to cable sensor assembly. Part Number: HE-LEAD-CIRC-6 or HE-LEAD-CIRC-6-RA or DH-LEAD-
CIRC-6
U.S. patents and Foreign patents are pending on this product.
© 2020 Worthington Industries Inc. 1/20
© 2020 Worthington Industries Inc. 10/20
REMOVE1 PRESS2 SLIDE3 LIFT4