Installation Instructions
4
Bluetooth Elite scale to weigh industrial
tanks up to 1,000kg
Input
Weight sensors data via Bluetooth
Reporting & Outputs
Reporting Measured parameter (5% variation)
Low battery
High/Excessive draw
Temperature
Data Interface Raw data
Client mobile app
Automated Testing Connection status
Battery status
Electrical Specifications
Battery Pack Hybrid LTC 8.5Ah ~ 3.6 Vdc
Radio Specifications
Receiver Freq.: 2402.000MHz ~ 2480.000MHz
Modulation: GFSK
Transmitter Freq.: 2402.000MHz ~ 2480.000MHz
Modulation: GFSK
Output: 4.73dBm
Features
Auto-pairing to any Otodata ready sensor
Android and IOS apps
Ready to install
Environmental Specifications
Operating & storage
temp. range
-40�C to 85�C -40�F to 185�F
Relative humidity range 0% to 100%
Enclosure rating IP67
Warranty 1 year
Certifications
ISED RSS-247, Issue 2 IC Registration: 12649A-BEHT3AD
FCC Part 15 Subpart C FCC ID: 2ADQFBEHT3AD
Dimensions
Height 114 mm 4.5 in
Width 749 mm 29.5 in
Depth 749 mm 29.5 in
Ordering
ES3026
Large Elite Scale with BT 2200lb (1000kg), no monitor
TM5030BG-VA00-CNEE -ES3026
Large Elite Scale with BT and Gen2 monitor 2200lb (1000kg)
This device complies with part 15 of the FCC Rules. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device is compliant with Industry Canada's RSS standards for licence-exempt
radio apparatuses. Authorized use depends on the following two conditions: (1) the device must not create radio interference, and (2) the device user must accept all radio interference, even if this interference could potentially impair its functioning.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or
more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.
Specifications