Installation Guide

PEOPLE FIRST
 OticonA/S  Kongebakken9  DK‐2765Smørum  www.oticon.com
 Main+4539177100 Fax+4539277900 DenmarkCVR‐no.42334219
1

Oticon Radio Model - Quick Installation Guide
Radio Model Name: mini BTE-EB
The mini BTE-EB radio model is a low power, inductive radio transceiver working at 3.84 MHz consisting of an RF Engine Block (incl. DSP, radio & memory),
antenna coil and a flex PCB motherboard (incl. small passive components). It is intended to be installed as a module into Oticon wireless hearing aid devices only.
The module also has all voltage regulators
included inside the engine block and a
phone detection switch & push button on
the motherboard.
The module requires a battery, one or two
microphones and a speaker to be attached and
must be mounted in an external plastic shell.
It is only possible for authorized personnel
to program the module through a programming
I/O-connector.
The module is depicted to the right:
mini BTE-EB Radio Model (seen from the top side)
mini BTE-EB Radio Model (seen from the bottom)