32" Stereo Soundbar System USER MANUAL SB-7724
PRODUCT OVERVIEW MAIN UNIT Front view 2 1 3 Side view 4 5 7 6 Back view 8 1. 2. 3. 4. 5. 6. 7. Remote Sensor Mode Indicating Lamp Set (Power On/Off) Button VOL- Button VOL+ Button (Play/Pause) Button MODE Button 9 10 11 8. 9. 10. 11. 12. 13.
REMOTE CONTROL R1 R2 R3 R5 R6 R4 R8 R7 R11 R9 R10 R12 R13 R15 R14 R16 R1. (Power On/Off) Button R2. RCA Button R3. AUX Button (for 3.5mm cable in) R4. HDMI Button R5. BT (Bluetooth) Button R6. USB Button R7. OPT (Optical in) Button R8. (Play/Pause) Button R9. (Previous) Button R10. (Next) Button R11. VOL+ Button R12. VOL- Button R13. (Mute) Button R14. EQ (Equalizer) Button R15. REC. (Recording) Button R16.
IMPORTANT SAFETY INSTRUCTIONS CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. DANGEROUS VOLTAGE: The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product`s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. Grounding or Polarization: Precaution should be taken to insure that the grounding or polarization means of an appliance is not defeated. Severe weather: In extreme weather such as lightning storm, hurricane, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the appliance due to unexpected power surges.
Battery precautions: Replacement of a battery with an incorrect type that can defeat a safeguard; Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion; Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas. 1. 2. 3.
PLACEMENT AND MOUNTING Placing the device on a table - Ventilation When placing the soundbar and subwoofer on an entertainment center, bookshelf, or any type of enclosed space, be sure to allow at least 5-8 cm (2-3 inches) of space around them for ventilation. If they are enclosed in a tight space, without ventilation, heat generated from them could produce a potential heat hazard. The Installation Distance 7 94.20 m m Mounting to a wooden wall 1. 2. 3.
Mounting to a brick wall 1. 2. 3. 4. 5. Mark the position of the mounting screws on the wall using a pencil. Drill 2 holes on wall with a powerful electric drill. Insert the plastic insert and hammer it into the hole. Secure the screws into the plastic insert and leave approx. 0.3 inches length to hook the soundbar. Put the soundbar onto the mounting screws. Make sure they are firm and stable. 794 .
GENERAL OPERATIONS 1. 2. Connect the AC/DC adapter to the unit and wall outlet. Press the button (3/R1) to power on the unit. The MODE indicating lamp (2) will light up. 3. Press the MODE button (7) repeatedly, or press the RCA (R2), AUX (R3), HDMI (R4), BT (R5), USB (R6) or OPT (R7) button switch to the desired mode directly. The corresponding lamp in MODE indicating lamp set (2) will light: BT (Blue)...................................................................................
AUDIO SOURCE SWITCHING BLUETOOTH OPERATION 1. 2. 3. 4. 5. 6. Power on the unit as previously explained. Press the MODE button (7) repeatedly, or press the BT button (R5) directly on remote control to switch to the Bluetooth mode, the BT/USB lamp in MODE indicating lamp set (2) will start to blink in Blue. Power on the external Bluetooth enabled device and enter Bluetooth mode to search the pairing name of the unit. When SB-7724 appears, select it to make the connection.
RCA IN OPERATION Through the unit you can listen the sound from a connected external audio/video device (such as TV, CD/DVD player). 1. Plug one end of the RCA Cable into the RCA in jack (12). 2. Plug the other end of the RCA Cable into the RCA Out jack (L&R) on the external device. 3. 4. Power on the unit as previously explained. Press the MODE button (7) repeatedly, or press the RCA button (R2) directly to switch to the RCA IN mode, the LINE IN lamp in MODE indicating lamp (2) set will turn to Green. 5.
5. indicating lamp set (2) will turn to Green. Power on the connected external player and start playback as usual. OPEN its "SETUP" window and set Digital Audio Output to PCM (Pulse Code Modulation) type similar to the below figure: HDMI IN OPERATION The TV with HDMI ARC port can be connected to this unit, and you can listen to the sound from it though the unit's speakers. 1. Plug one end of an HDMI Cable (user supply) into the HDMI ARC in jack (8). 2.
USB OPERATION 1. Insert a USB device to the USB port (9). 2. 3. Power on the unit as previously explained. Press the MODE button (7) repeatedly, or press the USB button (R6) on remote control directly to switch to the USB mode. The BT/USB lamp in MODE indicating lamp set (2) will turn to White. Then the audio tracks stored in the inserted USB device will be played automatically. NOTE: • When a USB flash drive is inserted, the unit will automatically switch to USB mode from the other audio input mode.
TROUBLESHOOTING SYMPTOM POSSIBLE CAUSE POSSIBLE SOLUTION No power The adapter is not connected Connect the adapter to the unit and wall outlet. The unit is in power off mode Press the the unit. No sound or sound Volume level in minimum weak position button (3/R1) to power on Raise the volume level by pressing the VOL+ button (5/R11). The connected device is not Play a track in the connected device and make sure its volume is in high level. in playback.
SPECIFICATIONS Power Input: AC 110-240V, 50/60 Hz Power Output: DC16V 2.25A, Audio Output: Mid-range speaker × 2 (12.5 W) Woofer × 1 (25 W) Bluetooth: V5.0 Remote Working range: 7 m (on the line of sight), horizontal: +/- 30 degrees, vertical: +/- 15 degrees. ACCESSORIES Remote Control x 1 Power Adapter x 1 RCA Connection Cable x 1 3.
The appliance is in compliance with the essential requirements and other relevant provisions of the following EC directives: 2014/35/EU Low voltage directive, 2014/53/EU Radio Equipment Directive and 2014/30/EU EMC directive. RECYCLING This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment.
FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Warranty Thank you for purchasing this product. You have received a 1-year warranty provided by OTIC since the day of purchase. The warranty does not cover normal aging changes, use not following the printed instructions, or any damage caused by moisture, drop, power surge, or such factors. For faster service, locate the model and type on your appliance. Purchase receipt is also required to obtain the maintenance service. If you have any enquiries, please contact us by email or visit our website.
Vendor: Shenzhen Junlan Electronic Ltd. Add: No.277 PingKui Road, Pingshan District, Shenzhen, CHINA After Service: https://otic.afterservice.vip Email: otic@afterservice.
