User Guide

www.otctools.com 800 533 6127

EnginE: 6918

Save major time replacing spark plugs in Ford Triton 3V engines

FORD SPARK PLUg REMOVER KiT

If it's not broken

Don't break it.

Unlike similar tools designed to remove the spark plug once it's broken,

OTC's new Ford Spark Plug Remover Kit is designed to prevent breakage

of the spark plug. Don't ﬁx something that's not broken in the ﬁrst place.

Step 2

Install the upper socket over the

hex of the collet holder assembly.

Step 3

Use ratchet to remove spark plug.

Step 1

Install the collet holder assembly onto the

spark plug hex and tighten collet screw.

Applications: FORD: 2005–2008 Mustang, 2004–2008 F-150, 2005–2008 Expedition & F-Super Duty,

2006–2008 Explorer & F-53 Motorhome Chassis, 2007–2008 Explorer Sport Trac

Cutaway view

Locking the plug porcelain core to the plug hex allows it to turn as one complete unit.

Scan here for a tool demo.

PAGE 1
Engine: 6918 FORD SPARK PLUG REMOVER KIT Save major time replacing spark plugs in Ford Triton 3V engines If it's not broken Don't break it. Unlike similar tools designed to remove the spark plug once it's broken, OTC's new Ford Spark Plug Remover Kit is designed to prevent breakage of the spark plug. Don't fix something that's not broken in the first place. Scan here for a tool demo. Step 1 Install the collet holder assembly onto the spark plug hex and tighten collet screw.
PAGE 2
Engine: 6918 FORD SPARK PLUG REMOVER KIT Separated Spark Plug Removal Procedure If a standard socket was used and only the hex portion of the spark plug was removed, but the entire porcelain insulator and ground electrode shield remain in the cylinder head: 1. Install the collet holder assembly. Slide the adapter over the collet screw until it bottoms out at the top of the spark plug port. 2. Thread the nut onto the collet screw to the adapter.