User Manual

Parts List & Operating Instructions Form No. 567768, Sheet 14 of 15 back
567622 Ford Crankshaft TDC Timing Pin
Application: 2012 2.0L Edge, MKX
2005 – 2008 2.3L Escape, Mariner
2009 – 2012 2.5L Escape, Mariner
2005 – 2012 2.0L Focus
2005 – 2007 2.3L Focus
2006 – 2009 2.3L Fusion, Milan, MKZ, Zephyr
2010 – 2014 2.5L Fusion
2010 – 2011 2.5L Milan
2010 – 2012 2.5L MKZ
2005 – 2011 2.3L Ranger
2010 – 2012 2.0L Transit
Note: The 567622 Crankshaft TDC Timing Pin will contact the crankshaft
and prevent it from turning past TDC. However, the crankshaft can still be
rotated in the counterclockwise direction. The crankshaft must remain at the
TDC position during the crankshaft pulley removal and installation.
1. Remove engine plug bolt.
Note: Rotate the crankshaft in the clockwise direction only.
2. Install the 567622 Crankshaft TDC Timing Pin in the hole. Rotate
crankshaft until it makes contact with the 567622 Crankshaft
TDC Timing Pin.
3. Perform crankshaft or timing service as required according to
vehicle service manual.
567623 Ford Crankshaft TDC Timing Pin
Application: 2011 – 2014 1.6L Escape, Fusion, Transit
2013 – 2014 1.6L Fiesta
Note: The 567623 Crankshaft TDC Timing Pin will contact the
crankshaft and prevent it from turning past TDC. However, the
crankshaft can still be rotated in the counterclockwise direction. The
crankshaft must remain at the TDC position during the crankshaft
pulley removal and installation.
1. Remove the engine plug bolt.
Note: Rotate the crankshaft in the clockwise direction only.
2. Install the 567623 Crankshaft TDC Timing Pin in the hole.
3. Rotate the crankshaft until it contacts the 567623 Crankshaft
TDC Timing Pin.
4. Perform crankshaft or timing service as required according to
vehicle service manual.
567768_15
567622
No. 567622
567768_9
567623
No. 567621
WARNING: Wear eye
protection that meets ANSI
Z87.1 and OSHA standards.
WARNING: Wear eye
protection that meets ANSI
Z87.1 and OSHA standards.