User Manual

Form No. 567768

Sheet No.

Issue Date: December 13, 2016 Rev. C

567618 Ford Camshaft Holding Tool

Application: 2007 – 2014 3.5L Edge

2011 – 2014 4.0L Edge

2011 – 2014 3.5L Explorer, F-150

2011 – 2014 3.7L F-150, MKX

2011 – 2012 4.0L F-150, MKX, Mustang

2012 – 2014 3.5L Flex

2010 – 2012 3.5L Fusion Hybrid

2007 – 2011 3.5L Milan

2010 – 2014 3.5L MKS, MKT

2009 – 2014 3.7L MKS

2010 – 2014 3.7L MKT

2007 – 2012 3.5L MKX, MKZ

2013 – 2014 3.7L MKZ

2011 – 2014 3.7L Mustang

2008 – 2012 3.5L Sable

2008 – 2014 3.5L Taurus, Taurus X

Note: The camshaft holding tool will hold the camshafts

in the Top Dead Center (TDC) position.

1. Rotate the engine to No. 1 TDC.

2. Install the 567618 on to the ats of the camshaft.

3. Perform camshaft service as required.

4. Refer to the vehicle service manual for the correct

camshaft to crankshaft timing procedure.

Parts List & Operating Instructions Form No. 567768

13 of 15

567768_1

567618

No. 567618

WARNING: Wear eye

protection that meets ANSI

Z87.1 and OSHA standards.