User Manual

Form No. 567768

Sheet No.

Issue Date: December 13, 2016 Rev. C

511542 (6475) Ford Crankshaft TDC Timing Pin

Application: 1997 – 2002 2.0L 4 cyl. Contour, Mystique (VIN 3)

1999 – 2002 2.0L Cougar (VIN 3)

2012 – 2014 2.0L Edge, Explorer (VIN 9)

2001 – 2004 2.0L Escape (VIN B)

2013 – 2014 2.0L Escape (VIN 9), Fusion, MKZ, Taurus

2012 – 2014 2.0L Focus (VIN 2)

2000 – 2004 2.0L Focus (VIN 3)

2002 – 2004 2.0L Focus (VIN 5)

2005 – 2011 2.0L Focus (VIN N)

2014 2.0L MKT

2010 – 2012 2.0L Transit (VIN N)

CAUTION: To prevent damage to the engine, remove the No. 511542 (6475) timing pin from the engine

and reinstall the access plug BEFORE cranking the engine.

1. Rotate crankshaft to set No. 1 cylinder on TDC of compression stroke.

2. Remove the access plug from the engine and install tool No. 511542 (6475) timing pin as shown. (The

pin will completely thread into the hole when the engine is at TDC on the No. 1 cylinder.)

3. Service the timing belt as required according to vehicle service manual procedures.

4. Torque fasteners to factory specications.

Parts List & Operating Instructions Form No. 567768

8 of 15

No. 6475

(511542)

WARNING: Wear eye

protection that meets ANSI

Z87.1 and OSHA standards.