User Manual

77
77
7
CAUTION: To prevent personal injury, wear eye
protection that meets ANSI Z87.1 and OSHA standards.
Nos. 529636, 529637, 529638
Timing Chain Retention Tools
contd.
529638
529637
529636
1. Ensure both camshaft timing marks are aligned
with the paint marks on the secondary timing
chain that were created during removal.
Paint
Mark
Cam
Timing
Mark
Paint
Mark
Cam
Timing
Mark
2. Use an open-end wrench on the hex cast into
the right intake camshaft to prevent the camshaft
from rotating when tightening the camshaft oil
control valve or cam sprocket bolt. Tighten to
the vehicle service manual specification.
3. Remove the timing chain retention tools from
the timing chains.
Installation