User Manual

44
44
4
CAUTION: To prevent personal injury, wear eye
protection that meets ANSI Z87.1 and OSHA standards.
No. 527058
Secondary Drive Sprocket Fixture
Application : 2000—Current 4.6L V8 Cadillac
2001—2003 4.0L V8 Oldsmobile Aurora
Similar to
Kent-Moore
J-44213
1. Install No. 527057 Camshaft Holding Tool
(included in this kit) on the camshafts.
2. Remove the camshaft sprocket bolts.
3. Install No. 527058 Secondary Drive Sprocket
Fixture on the cylinder head.
4. Remove the secondary camshaft drive chain
shoe access plug.
6. Slide the intake and exhaust camshaft sprockets
onto the pins on the No. 527058.
7.
Refer to the vehicle service manual for instructions
to perform the camshaft service required.
5. Loosen the secondary drive chain shoe bolt
two turns. Important : Loosen the bolt only
enough to take the pressure off. Loosening
the bolt too much will cause the shoe to fall
to the bottom of the engine.
No. 527057
Camshaft Holding Tool
No. 527058
Secondary Drive
Socket Fixture
Secondary
Camshaft Drive
Chain Shoe
Access Plug
No. 527058
No. 527058
No. 527057
Loosen bolt two turns.
kk
kk
k