Manualshelf

User Manual

ManualsBrandsOTC ManualsAutomotiveCam Tool Set - GM NorthStar V8
12345678910
33
33
3
CAUTION: To prevent personal injury, wear eye
protection that meets ANSI Z87.1 and OSHA standards.
No. 527057
Camshaft Holding Tool
Application : 2000—Current 4.6L V8 Cadillac
2001—2003 4.0L V8 Oldsmobile Aurora
Similar to
Kent-Moore
J-44212
1. Rotate the crankshaft to Top Dead Center (TDC) #1 cylinder compression stroke. Both camshaft
sprockets should be at the top of their rotation.
2. Install No. 527057 Camshaft Holding Tool over the camshaft.
Note : Two camshaft holding tools have
been provided in this set in case the technician wants to pull both heads at the same time.
No. 527057
Camshaft
Holding Tool
3. Position an open-end wrench on the hex cast into the camshafts to prevent the camshafts from rotating
when removing / installing the camshaft sprocket bolt. Important : Using an open-end wrench will
prevent damage to the Camshaft Holding Tool.
Open End Wrench
No. 527057
Camshaft Holding Tool