User Manual

ManualsBrandsOTC ManualsAutomotiveOTC 5702 Tire Bead Seater

Sheet No.

Issue Date: Rev. A June 29, 2012

Form No. 563999

Parts List &

Operating Instructions

for: 5702

Tire Bead Seater

Application: Seats tubeless tires in a wide range of sizes.

For example, small ATVs, passenger cars and trucks, heavy-duty vehicles, and agricultural machinery.

655 EISENHOWER DRIVE

OWATONNA, MN 55060-0995 USA

PHONE: (507) 455-7000

TECH. SERV.: (800) 533-6127

FAX: (800) 955-8329

ORDER ENTRY: (800) 533-6127

FAX: (800) 283-8665

INTERNATIONAL SALES: (507) 455-7223

FAX: (507) 455-7063

Original Instructions

1 of 3

Explanation of Safety Signal Words

The safety signal word designates the degree or level of hazard seriousness.

DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or

serious injury.

WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or

serious injury.

CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or

moderate injury.

CAUTION: Used without the safety alert symbol indicates a potentially hazardous situation which, if not

avoided, may result in property damage.

Description:

This equipment uses compressed

air to lift and seal the tire bead to

the wheel rim.

Summary of content (5 pages)

PAGE 1
655 EISENHOWER DRIVE OWATONNA, MN 55060-0995 USA PHONE: (507) 455-7000 TECH. SERV.: (800) 533-6127 FAX: (800) 955-8329 ORDER ENTRY: (800) 533-6127 FAX: (800) 283-8665 INTERNATIONAL SALES: (507) 455-7223 FAX: (507) 455-7063 Form No. 563999 Parts List & Operating Instructions for: 5702 Original Instructions Tire Bead Seater Application: Seats tubeless tires in a wide range of sizes. For example, small ATVs, passenger cars and trucks, heavy-duty vehicles, and agricultural machinery.
PAGE 2
Parts List & Operating Instructions Form No. 563999, Sheet 1 of 3, Back Safety Precautions CAUTION: To prevent personal injury and/ or property damage, • • • • • • • • • • • • • • Study, understand, and follow all safety precautions and operating instructions before using the Tire Bead Seating Tool. If the operator cannot read instructions, operating instructions and safety precautions must be read and discussed in the operator’s native language.
PAGE 3
Parts List & Operating Instructions Form No. 563999 Operating Instructions 1. Position the tire with the narrow bead on top and the tire valve facing up, if possible. It may be necessary to supply air through the valve while seating the bead. 2. Connect shop air to the air fitting on the Tire Bead Seater. The air supply must be clean, dry, oil-free, and regulated. 3. Open the air valve until the gauge on the air tank reads a minimum of 100 psi. Air pressure must be between 90 psi and 140 psi.
PAGE 4
Parts List & Operating Instructions Form No. 563999, Sheet 2 of 3, Back Replacement Parts List 1 2 3 4 5 9 6 8 7 11 Item No. Part No. Qty. 1 2 3 4 5 6 7 8 9 564004 560752 560751 562999 564007 563028 15939 557478 508690 1 1 1 1 1 1 1 1 1 Description Air Tank (2 gallon) Pressure Gauge Relief Valve (150 psi) Air Fill Valve Assembly Pipe Nipple Nozzle Straight Fitting Ball Valve (1/4 NPTF) Tee Fitting (.25 NPT) 10 12 13 14 15 16 Item No. Qty.
PAGE 5
Parts List & Operating Instructions Form No. 563999 Inspection and Maintenance • • • CAUTION: To prevent personal injury, Only qualified personnel shall perform inspections and repairs to the Tire Bead Seater. Inspect the condition of the tool before each use; do not use if damaged, altered, or in poor condition. If damage is found, discontinue use. Use only those repair parts called out in the parts list in this document. Items found in the parts list have been carefully tested and selected by SPX.