User Manual

ManualsBrandsOTC ManualsAutomotiveFreightliner Rear Suspension Bushing Tool

Sheet No.

Issue Date: Rev B, June 18, 2012

1 of 3

Form No. 563106

Parts List &

Operating Instructions

for: 4244

4245

655 EISENHOWER DRIVE

OWATONNA, MN 55060-0995 USA

PHONE: (507) 455-7000

TECH. SERV.: (800) 533-6127

FAX: (800) 955-8329

ORDER ENTRY: (800) 533-6127

FAX: (800) 283-8665

INTERNATIONAL SALES: (507) 455-7223

FAX: (507) 455-7063

Rear Suspension Bushing Remover/Installer

Application: FAS II AirLiner Semi-Tractor Suspension

Explanation of Safety Signal Words

The safety signal word designates the degree or level of hazard seriousness.

DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or

serious injury.

WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or

serious injury.

CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or

moderate injury.

CAUTION: Used without the safety alert symbol indicates a potentially hazardous situation which, if not

avoided, may result in property damage.

Summary of content (5 pages)

PAGE 1
655 EISENHOWER DRIVE OWATONNA, MN 55060-0995 USA PHONE: (507) 455-7000 TECH. SERV.: (800) 533-6127 FAX: (800) 955-8329 ORDER ENTRY: (800) 533-6127 FAX: (800) 283-8665 INTERNATIONAL SALES: (507) 455-7223 FAX: (507) 455-7063 Form No. 563106 Parts List & Operating Instructions for: 4244 4245 Rear Suspension Bushing Remover/Installer Application: FAS II AirLiner Semi-Tractor Suspension Explanation of Safety Signal Words The safety signal word designates the degree or level of hazard seriousness.
PAGE 2
Parts List & Operating Instructions Form No. 563106, Sheet 1 of 3, Back Safety Precautions CAUTION: To prevent personal injury and/ or property damage, • Study, understand, and follow all safety precautions and operating instructions before using this rear suspension bushing remover/installer. If the operator cannot read instructions, operating instructions and safety precautions must be read and discussed in the operator’s native language.
PAGE 3
Parts List & Operating Instructions Form No. 563106 Parts List 2 1 3 7 5 4 6 Item No. Part No. 1 559016 2 3 4 5 6 559018 559017 561407 10218 561037 7 561036 2510A No. Req'd Description 1 Pushing Head 2 Threaded Rod 1 Cylinder Mounting Plate 1 15-Ton Cylinder 4 Hex Nut 1 Adapter 1 Adapter 1 Air/Hydraulic Pump (for 4245) 1 Hose Assembly (for 4245) 1 Hose Half Coupler (for 4245) Parts Included But Not Shown 36886 9798 © 2012 SPX Sheet No.
PAGE 4
Parts List & Operating Instructions Form No. 563106, Sheet 2 of 3, Back Setup Refer to parts list. 1. Assemble the pushing head plate and cylinder mounting plate together with the two threaded rods, and secure with the four hex nuts. 2. Thread the cylinder into the cylinder mounting plate. 3. Prepare the air/hydraulic pump for use by following the instructions provided for hookup, venting, priming, and operation. Note: A hydraulic hand pump can be used also. 4.
PAGE 5
Parts List & Operating Instructions Form No. 563106 Inspection and Maintenance • • • CAUTION: To prevent personal injury, Only qualified personnel shall perform inspections to this rear suspension bushing remover/installer. Before each use, an approved inspector must inspect the rear suspension bushing remover/installer for bends, cracks, dents, elongated holes, or missing hardware. If damage is found, discontinue use. Use only those repair parts called out in the parts list in this document.