burn Quick Start Guide
OTbeat Burn Quick Start Guide Instructions for: 1. Getting Started 2. Downloading the Orangetheory App 3. Charging Device 4. Proper Placement 5. Pairing Device 6. LED Guide 7. Caring for Device 8. Technical Specifications Getting Started: 1. Included in packaging: OTbeat Burn, SM band, LG band, & USB cord 2. Remove OTbeat Burn from packaging 3. Connect USB cord into charging port of device to wake the device from manufacturing sleep mode 4.
Charging Device: OTbeat Burn - Charging Device 1. Open rubber port cover on back of device 2. Plug in mini-USB connector into device port 3. Plug in regular USB connector into charging block (not provided) 4. Plug in charging block into wall outlet (BACK OF OTBEAT BURN) Optical heart rate sensor LED lights Device can be connected directly to a computer USB port for charging. Note: Charging time will vary due to differences in voltage between wall outlet and computer.
Proper Placement: OTbeat Burn - Proper Placement To transmit accurate data from your device: 1. Fasten device snugly in one of the below placement options Note: Ideal placement is above or below the elbow. 2. Wear device below, and not directly on top, of wrist bone* or elbow 3.
Pairing Device: OTbeat Burn - Pairing Device 1.
Pairing Device (Cont.): OTbeat Burn - Pairing Device 2. Launch the settings app on your mobile device 3.
Pairing Device (Cont): OTbeat Burn - Pairing Device 4. Open Orangetheory app on mobile phone.
Pairing Device (Cont.): 5.
LED Guide: OTbeat Burn - LED Guide Heart Rate Detection LED Indication: Alternating BLUE and GREEN: Detecting heart rate Alternating BLUE and RED: No heart rate detected Blinking GREEN: Heart rate detected Blinking ORANGE: Heart rate zones are changing Bluetooth Connection State: Blue LED blinks for 5 seconds: After turning on the unit Blue LED continuously on for 5 seconds: Connected Green LED continuously on: Updating firmware Battery LED Light During Charging: Red LED blinks slowly: Charging Green
OTbeat Burn - Caring for Device Caring for Device: 1. To ensure accurate readings, clean the sensors with a soft cloth after use 2. OTbeat Burn unit and strap are waterproof to IP67 specifications and can be easily cleaned with mild soap and cool water 3. Use a cotton swab and rubbing alcohol to clean the USB charging contacts when necessary. Do NOT contact USB charging port 4. Do not use any abrasive chemicals to clean the OTbeat Burn unit, sensor, or strap.
OTbeat Burn - Technical Specifications Technical Specifications: Feature Description Functions heart rate detection and transmission (ANT+ or Bluetooth 5.0), battery low alert Heart Rate Range 30 to 220 BPM in 1 BPM resolution Heart Rate Accuracy +/-5 BPM Transmission ANT+ /BLE Power Supply 3.
For more information visit orangetheory.
(date) (brand) OT (version) A0 (electronics engineer) (Designers) 唐雄 (Review) 2021-5-5 (Company Model) (design content) SIZE (structural engineer) (project manager) 70g哑粉纸 单黑印刷 工艺要求 单骑马钉装订 PRINT OTbeat 12.005.0004.
