MIXpro Q U I C K S TA R T G U I D E ACCESSORIES
GENERAL Congratulations for buying this advanced multifunctional outdoorwatch. Take a moment to read this guide carefully. These resources provide important setup information and are designed to help you get the most from your device. If you regularly carry out a sporting activity or wish to step up your training, the MIXpro heart rate monitor is the perfect choice for you.
CONTENTS General Contents _2 _3 1 IN THE BOX _4 2 GETTING STARTED Buttons Icons Turn on the MIXpro Backlight Navigations Time Date Chimes/beeper Alarm Second Time zone _5 _5 _5 _6 _6 _6 _6 _6 _7 _7 _7 3 SETTING AND PAIRING (optional) _7 What is Pairing? _7 Switch on the sensors _8 Personal and basic settings _8 4 USING ACCESSORIES Switch off the sensors _12 _13 5 SPORT-MODE Stop watch w/o sensors Stop watch with sensors _14 _14 _14 6 TIMER-MODE (Countdown) Setting the Countdowns Setting the Timer
1 IN THE BOX 1x MIXpro Multi watch 1x HEART2feel X Heart rate monitor belt For more information about Optional Compatible Accessories go to www.o-synce.com MAXrun Foot pod sensor for running and walking MACRO2SXspe Speed sensor for biking MACRO2SXcad Cadence sensor for biking MAXpc USB transceiver for PC-Download of the training data (store & analyse with SAS) Strong electromagnetic fields and some 2.4 GHz wireless sensors can interfere with your heart rate monitor and other accesories.
2 GETTING STARTED BUTTONS (meaning is written on the backplate of the watch) Button A (right): START/STOP/+ Stop watch > Start and Stopp press to increase value for settings press to customize settings press & hold Button B (front): VIEW/LIGHT to scroll through data pages in Sport or History mode press to advance to the next setting press for switching on the backlight press & hold Button C (left down): MODE To change modes press To exit a menu or page press To jump back to the time mode press & hold Button
TURN ON YOUR MIXpro Press and hold C to turn on your MIXpro because the watch from factory is on stand by mode to conserve the battery. For more information see BATTERY. BACKLIGHT Press and hold B to turn on the backlight for 5 seconds. Extend the backlight for 5 more seconds by pressing any button. NAVIGATION The MIXpro watch includes four modes: TIME SPORT INTERVAL TIMERTRAIN HISTORY With the key C you can switch from one mode to the next.
BEEPER The key tone /beeper will be active then the beep icon is shown in the TIME mode. To activate the beeper you have to hold B for 5 seconds. The icon will be shown on the screen! ALARM The alarm icon will be shown on the Time mode, press A or D to switch the alarm on or off. Press C to go back to the alarm mode. TIME A 12:00 - ALARM A A3 12:00 - - B HOUR 12 Flashing values can be changed with A(+) or D(-) A3 Press and hold for 3 sec.
SWITCH ON THE SENSORS After 30 minutes of inactivity the sensors are on standby and ready to send data. As soon as you install the sensors and start moving, the sensors send data to the watch (after pairing!). If you use the MACROX sensor on the bike, turn the wheel and crankset where the magnet is mounted. UNITS, TRAINING PARAMETER, SENSORS PAIRING Will be set in the SPORT-Mode (see diagram).
Setting mode: Press and hold A for 5 seconds. > UNITS: KM blinks. Press A or D to switch to Miles (MI). press B to confirm. > GENDER: F blinks. Press A or D to switch to Male. press B to confirm. > WGT KG (Weight): 68 blinks. Press A (+) or D (-) to change the value. press B to confirm. > ZONES (Training zones): OFF blinks. Press A or D to switch it ON, if you want to use the Training zones. press B to confirm If Training Zone ON: ZOTONE (beeper): OFF blinks.
Weelsize L (mm) 47-305 16x1.75x2 1272 32-630 27x1 1/4 2199 47-406 20x1.75x2 1590 28-630 27x1 1/4 Fifty 2174 37-540 24x1 3/8 A 1948 40-622 28x1.5 2224 47-507 24x1.75x2 1907 47-622 28x1.75 2268 23-571 26x1 1973 40-635 28x1 1/2 40-559 26x1.5 37-622 28x1 3/8x1 5/8 44-559 26x1.6 18-622 700x18C 47-559 26x1.75x2 20-622 700x20C 50-559 2-6x1.9 23-622 700x23C 54-559 26x2.00 2265 2026 2205 2051 2102 2070 2114 2089 2133 2114 25-622 700x25C 57-559 26x2.
1x L mm F Flashing values can be changed with A(+) or D(-) A5 Press and hold for 5 sec. *Automatic B B OFF ON Distance for Laps B ON 01,000 A 0PUSH0 B CALIB B 0:00.0 LAP/KM 0OFF0 B 01,000 CALIB RUN A ZONES 00:00.00 Foot pod Speed zone OFF B 0OFF0 SPD ON 015,00 SPD HI 0OFF0 TONE B CALIB SAVED B B ACTUAL B (1Sek) B 08,60 SPD LO 00´00´´00 00:00.00 CALIBRATE THE FOOT POD SENSOR You can calibrate the foot pod sensor (MAXrun) by running a precise distance of minimum 400 meter.
4 USING ACCESSORIES HEART2feelX SOFT BELT The chest strap must be positioned around your chest. when correctly placed, it sends heart rate information to the watch located on your wrist. The watch then displays the heart rate and provides other extra information (target zone, intensity of exercises) to manage and optimize your fitness and training. The soft belt will be connected with two clips at the sensor case.
ference and receiver distance from transmitter. Strong electromagnetic fields and some 2.4 GHz wireless sensors can interfere with your heart rate monitor. Sources of interference may include very high voltage power lines, electric motors, microwave ovens, 2.4 GHz cordless phones, and wireless LAN access points. After you move away from the source of interference, your heart rate data should return to normal. NOTE: Stay 10 m away from other ANT sensors while pairing.
5 SPORT-MODE The SPORT-Mode offers several options: _ Stop watch with 99 laps _ Speed, distance and cadence for biking or running _ Heart frequency _ Personal settings _ Data recording _ Recording max. 7 hours If you don’t use any sensor, only the stop watch is working. Any sensor which is paired will be shown permanently as symbol on the display.
SPORT A 00´00´´00 START/ 00:00. 00 Stop w/o lap D A Stop with lap 00´00´´00 Lap 1 LAP1/ 00:00. 00 D 00´00´´00 Lap ‘98 LAP98/ 00:00. 00 A STOP 00´00´´00 00´00´´00 STOP/ Lap ‘99 STOP/ 00:00 00 00:00. 00 D3 Save data D YES SAVE NO Don’t save data SAVE B NN B SAVED A 00´00´´00 C DATA 00:00.
SPORT A Upper Display B 00´00´´00 START/ 00 B HR/ 00:00. 00 00 00 B 00:00. 00 00 00 SPEED/ DIST/ 00:00. 00 00:00. 00 B 00´00´´00 SPLIT/ 00:00. 00 B B 00´00´´00 LAP/ 00:00. 00 00 B CAD/ 00:00.
When finished, press B to advance to the REPEAT setting Press D (+) and A (-) to turn on or off the repeat function. Press B to advance to TIMER 2 settings. Press D (+) and A (-) to turn on or off the TIMER 2 function. Repeat the steps from TIMER1 to set TIMER 2. When finished, press mode to resume Timer mode. USE OF THE COUNTDOWN TIMER 1 START press A TIMER 1 STOP press A TIMER 1 RESET press & hold D USING TIMER REPEAT Set the timer to REPEAT to automatically restart the timer after it beeps.
Then do minuts and seconds in the same way. See the diagram below. Switch on the repeat countdowns of one or both TIMERS – infinite loop REPEAT: OFF (blinks): Press D, to switch ON. Confirm with B Activate Countdown TIMER 2: OFF (blinks): Press D, to switch ON.
7 HISTORY MODE The MIXpro holds up to 100 laps and up to seven hours of exercise files and stores workout data based on the type of workout, the accessories used, and your training settings. Press C until the DATA mode appears. VIEWING WORKOUT HISTORY On the DATA mode, press D (+) and A (-) to scroll through your saved runs and workout data. Press B to display the start time for that run.
Open the SAS sw on your computer and press the button for ‘connection to the device’. If you are using the watch the first time you have to confirm the connection by pressing B on the watch. After the connection, the recorded data will be automatically transmitted. NOTE: If you are having problems uploading data, you may need to enable computer pairing.
settings. Workout data is deleted. You must reset the time and custom settings. NOTE: o-synce recommends that you take the MIXpro to a professional watch repair person to have the battery replaced. MAINTENANCE AND CARE Clean the MIXpro and accessories using a cloth dampened with a mild detergent solution, and then wipe dry. Avoid chemical cleaners and solvents that may damage plastic components.
units purchased outside Germany. This warranty is provided by the local in-country distributor and this distributor provides local service for your unit. Distributor warranties are only valid in the area of intended distribution. RECYCLING The symbol means that you are not allowed to waste the batteries in your normal waste. PLease contact your local waste department to properly dispose of the units and batteries. Do not incinerate. Keep used batteries away from children.
