User's Manual

The Reticle Speed Mouse (RSM) is an 3D input device for the system that is

worn on the user’s index nger and controlled with their thumb. The Track

Pad, Menu, Back, and Volume buttons function in the same manner as the

buttons on the glasses. (See Main Controls, Pages 8-9).

To power up the RSM, press any of the buttons or simply put the device

around your nger. A contact pin on the underside of the device will allow

it to detect when you are holding it. Once the device powers on, the status

light will flash and begin glowing blue indicating it is ready to be paired. If

the status light does not illuminate then the battery needs to be charged

(see Charging). When the status light turns off the pairing is complete.

Bluetooth Pairing

The RSM is in pairing mode while the status light is glowing blue. On the

glasses, press the Menu button once to display the System Menu (see Page

11) then select Settings. Under the Bluetooth settings, select the RSM from

the list of available devices. (It will appear as “ODG Speed Mouse” in the list

of devices.) You can reset the RSM and make it forget any previous pairing

by pressing and holding the Back and Menu buttons simultaneously for

longer than 8 seconds.

FINGER STRAP

CHARGING PORT & LIGHT

STATUS LIGHT

TRACK PAD/CLICK

BACK

SPEED BUTTONS

VOLUME DOWN

TOGGLE 3D MODE

VOLUME UP

RETICLE SPEED MOUSE

(PRESSED TOGETHER)

(BOTTOM)