User's Manual
5
The Wireless Finger Controller is an input device for the system that
is worn on the user’s index nger and controlled with their thumb. The
Track Pad, Menu and Back buttons function in the same manner as the
device’s buttons. (See Main Components, Page 8)
To power up the controller, insert the battery and press and hold the Back
and Menu buttons simultaneously until the status light ashes green.
If the controller does not connect to the glasses the battery may not be
charged or the Bluetooth pairing may be lost.
Bluetooth Pairing
To enter pairing mode on the controller, press the Back, Menu and Track
Pad simultaneously until the status light blinks blue. On the glasses, press
and hold the Menu button to display the System Menu (See Page 16) and
select Settings. Under the Bluetooth settings, select the controller from
the list of available devices.
Charging
Included in the kit is a charger for the Wireless Finger Controller battery.
Disconnect the battery from the controller and insert the battery into the
charger. The battery should be fully charged in 3 hours.
Wireless Finger Controller
BACK BUTTON
MENU BUTTON
FINGER STRAP
BATTERY
TRACK PAD/CLICK