Cookware User Manual

English-4 English-5

Pa r t s Id e n t I f I c a t I o n

Kn o w Yo u r el e c t r I c sK I l l e t

1. Lid Knob

2. Steam Vent

3. Glass Lid

4. Base Handle

5. Skillet Pan

Ho w to us e Yo u r el e c t r I c sK I l l e t

Before use, wash the SKILLET PAN and LID in warm soapy water or

in the dishwasher and dry completely.

CAUTION: Do not immerse HEATING BASE in water or other liquids.

1. Set the skillet on a flat, dry, heat resistant surface.

2. Make sure that the SKILLET PAN is sitting securely on the HEATING

BASE. If the SKILLET PAN is not secure on the HEATING BASE, the

product may not function properly.

3. Turn TEMPERATURE CONTROL DIAL to “OFF”. Plug skillet into

standard 120V AC outlet and turn TEMPERATURE CONTROL DIAL

to desired setting, by aligning the temperature with the POWER

INDICATOR LIGHT. The POWER INDICATOR LIGHT will come on

and remain on while the TEMPERATURE CONTROL DIAL is on the

WARM or higher settings. Warm Setting: WARM is recommended for

keeping already hot, fully cooked food at the perfect serving temperature.

We do not recommend using the WARM setting for more than 4 hours.

4. Preheat the skillet with the LID on for 10 -15 minutes. NOTE: Due to

manufacturing process, during initial use of this appliance, some slight

smoke and/or odor may be detected. This is normal with many heating

appliances and will not recur after a few uses.

5. The STEAM VENT allows steam to escape while cooking with the LID in

place. CAUTION: Escaping steam is HOT! Be careful when removing or

lifting LID. Oven mitts are required when handling the LID or SKILLET PAN.

6. When cooking is complete turn TEMPERATURE CONTROL DIAL to “OFF”.

7. Prior to removing pan from HEATING BASE, turn TEMPERATURE

CONTROL DIAL to “OFF” and remove plug from wall outlet.

8. The SKILLET PAN can be removed from the HEATING BASE and placed

in the oven for baking or roasting. The LID must be removed when using

the SKILLET PAN in the oven.

9. The SKILLET PAN can be used as a serving piece.

When placing the SKILLET PAN on a countertop,

kitchen table or other surface, place a hot plate or

trivet that measures at least 3/8” high under the pan

to prevent burning or discoloration of the surface.

6. Heating Base

7. Temperature Control Dial

8. Power Indicator Light