Installation Guide

8
z When the oven is first plugged in, the display will briefly show “CLOCK”,”1:01”.
z During cook setting mode, the system will return to waiting mode if there is not any operation within 25seconds.
z After a cooking program has finished, the oven will sound beeps with END showing on screen, press RESET
pad or open oven door to clear it before setting another function.
z During cooking, if press START/STOP pad once, the program will be paused, then press START/STOP pad to
resume, but if press START/STOP pad once, and then press RESET pad, the program will be canceled.
SETTING THE CLOCK
This is a 12 or 24 hour clock, you can press and hold TIMER/CLOCK pad for 3 seconds to select 12 hour cycle or
press TIMER/CLOCK pad twice to select 24 hour cycle. To enter the digital clock time, press the TIMER/CLOCK pad
once and then press the number pads to set the time of day.
For example: to set the time of 6: 35.
1. Press and hold TIMER/CLOCK pad for three seconds,”Hr12” will display, press TIMER/CLOCK again,”24Hr” will
display.
2 . Touch number pad to enter clock time.
3. Press TIMER/CLOCK pad again to confirm.
SETTING THE TIMER
The longest time is 99 min. 99 sec.
Suppose you want to set 30 minutes timer.
1. In standby mode, press TIMER/CLOCK pad once
2. Press the number pads to enter “30：00”.
3. Press START/STOP to confirm.
NOTE:
• You can check the timer time by pressing TIMER/CLOCK pad once, and you can cancel this function by pressing
RESET pad within 5 seconds.
SETTING A COOKING PROGRAM
To cook with microwave, time and power level should be set. The longest cooking time is 99 min. 99 sec.
By pressing the POWER pad a number of times, you are selecting one of the following microwave power levels:
OPERATION INSTRUCTIONS