Installation Guide

3
1. Make sure all packing materials are removed from inside the microwave door.
2. Check the microwave for damage, such as misaligned or bent door, damaged door seals and sealing surface, broken
or loose door hinges and latches, and dents inside the cavity or on the door. If there are any damages, do not operate
the microwave and contact Customer Service at 1-800-324-0340.
3. This microwave must be placed on a flat, stable surface to hold its weight and the heaviest food likely to be cooked
inside.
4. Do not place the oven where heat, moisture, or high humidity is generated. Do not place microwave near combustible
materials.
5. For correct operation, the oven must have sufficient air flow. Allow 8” of space above the microwave, 4” at the back,
and 2” on each side of the unit.
6. Do not cover or block any openings on the microwave. Do not remove microwave feet. Do not operate the oven without
the glass tray, roller support, and shaft in their proper positions.
7. Make sure the power supply cord is undamaged and does not run under the microwave or over any hot or sharp
surface.
8. The socket must be readily accessible so the microwave can be easily unplugged in an emergency.
SAVE THESE INSTRUCTIONS
INSTALLATION GUIDE