User Manual

9
8
6 Cup glass Jar Assembly
1.PlaceBladeintoThreadedJarBottom(Fig.1).
2.Placesealingringoverbladeassembly.Carefullypress
andtucksealingringintolockinggroove(Fig2).
3.Ensurethelockingsealingringisfullyandevenly
tuckedinplaceandholdingthebladeassemblytothe
threadedjarbottom.Forcorrectassemblysee(Fig3).
4. InstalltheIntegratedBladeAssemblyontotheJar.Turnclockwisetotighten.
 BesuretheIntegratedBladeAssemblyistightenedtothejarbeforeusing.
NOTE:ForproperinstallationontoBlenderMotorbase,makesurelocking
leverrotatespasttheanti-rotationtabsontheBlenderjarorsmoothiecup.
See(Fig4).CAUTION: If Locking Lever is damaged or missing, do not
operate blender, and contact Customer Service for a replacement.
5.Puttheingredientsintothejar.
6.Securethelidandllercap.
7. Placethejarontothebase.
8. Plugthepowercordintoastandardhousehold
120/127-volt,60hz.ACoutlet.Youarenowreadytostart.
ALWAYSPLACEHANDONCONTAINERCOVER
WHILEOPERATINGBLENDER.
8 Cup Tritan
TM
Jar Assembly
1.Installthesealingringovertheblade.
2.Turnthejarupsidedownandplaceiton
aatandstablesurface.
3.Turnthebladewithsealingringupsidedownandplaceintothebottomofthejar.
4.Installthethreadedjarbottomoverthebladeassembly.Turnclockwiseto
tighten.Besurethethreadedjarbottomistightenedtothejarbeforeusing.
5.Choosearecipefromtherecipebookprovided.
6.Puttheingredientsintothejar.
7.Securethelidandllercap.
8.Slidethejarontothebase.
Fig1
Fig4
Fig2
Locking
SealingRing
ThreadedJar
Bottomwith
lockinglever
Fig3
Incorrect Correct!
Blade
LockingLever
9. Plugthepowercordintoastandardhousehold120/127-volt,60hz.ACoutlet.
Youarenowreadytostart.
Using the Pre-Programmed Settings
1. PresstheON/OFFpowerbuttontoturntheproducton.Thepowerlight
willblink,indicatingtheproductisactiveandreadytouse.Thelightwill
stayonwhenthemotorisrunning.
2. SelectandPressthedesiredPre-ProgrammedSettingButton:
 -“Green/FrozenSmoothie”
 -“FoodChop/Salsa”
 -“Milkshakes”
3. Tochangeyourselection,pressStopfollowedbyanotherPre-Programmed
Settingbutton(“FrozenDrinks&Shakes”or“FoodChop”)
4. Oncetheprogramisnishedtheproductautomaticallystops.Pleasenote:
Youmaypressthe“Stop”buttontocanceltheprogramatanytime.The
blinkingbulelightindicatesthattheblenderisready.
5. PresstheON/OFFpowerbuttontoturntheproductoff.Thisproductis
pre-programmedtoturnoffautomaticallyifnotusedforaperiodofseveral
minutes.Alllightswillturnoffwhentheunitautomaticallypowersdown.
Using the Manual Controls
TheManual Controls include:
 Low
 Med
 High
 Pulse
Stop
Usethesecontrolsforpersonalrecipesortocontinueblendingaftera
ProgrammedSettingisnished.
1. PresstheON/OFFpowerbuttontoturntheproducton.Thepowerlight
willblink,meaningtheproductisactiveandreadytouse.Thelightwillstay
onwhenthemotorisrunning.
2. Puttheingredientsintothejar.
3. Securethelidandthellercap.
Using High
1.Pressthe“High”buttontoruntheproductatahighspeed.
2.Pressthe“Stop”buttontocanceltheoperationatanytime.
3.PresstheON/OFFpowerbuttontoturntheproductoff.
Using the Medium
1.Pressthe“Medium”buttontoruntheproductatamediumspeed.
2.Pressthe“Stop”buttontocanceltheprogramatanytime.
3.PresstheON/OFFpowerbuttontoturntheproductoff.
Using the Low
1.Pressthe“Low”buttontoruntheproductatalowspeed.
2.Pressthe“Stop”buttontocanceltheprogramatanytime.
3.PresstheON/OFFpowerbuttontoturntheproductoff.
Filler Cap
Jar Bottom
Note: The filler cap can be used as a tool to
tighten or remove the threaded jar bottom.
Threaded
BLSTMB_16ESM1.indd 8-9 5/18/16 11:40 AM