User Manual

3
2
IMPORTANT SAFEGUARDS
When using your blender, you should always follow basic safety precautions, including
the following:
• Readallinstructionsbeforeuse.
• Toprotectagainstelectricalhazards,donotimmersethecord,plugormotorbasein
waterorotherliquids.
• Alwaysusetheproductonaclean,at,hard,drysurface.Thereshouldbenomaterial
suchasatableclothorplasticbetweentheunitandsurface.
• Flashinglightindicatesblenderisreadytooperate.AvoidANYcontactwiththe
bladesormovingparts.
• Keephandsandutensilsoutofjarwhileblendingtoreducetheriskofinjuryor
damagetotheblender.Ascrapermaybeusedbutmustbeusedonlywhentheblender
isnotrunning.
• Donotoperateanyappliancewithadamagedcordorplugoraftertheappliance
malfunctions,orisdroppedordamagedinanymanner.Returnappliancetothe
nearestauthorizedservicefacilityforexamination,repairorelectricalormechanical
adjustment.
• Theblenderbladesaresharp.Handlecarefully.
• Toreducetheriskofinjury,neverplacecutter-assemblybladesonbasewithoutjar
properlyattached.
• Alwaysputthelidonthejarbeforeoperatingtheblender.
• Whenblendinghotliquidsbewareofsteam.Removethellercapfromthelidto
allowsteamtoescape.
• Donotuseoutdoors.
• Donotallowthecordtotouchhotsurfaces,includingthestove,orhangovertheedge
ofatableorcounter.
• Unplugtheblenderwhenitisnotinuse,beforetakingofforputtingonparts,and
beforecleaning.Todisconnect,turnapplianceoffbypressingON/Offbuttonand
removeplugfromoutlet.
• Thisapplianceisnottobeusedbychildrenorbypersonswithreducedphysical,
sensoryormentalcapabilities.
• Closesupervisionisnecessarywhenanyapplianceisusednearchildren.Children
shouldnotplaywiththeappliance.
• Donotblendboilingliquidsintheblender.
• Theuseofattachments,includingcanningjars,notrecommendedbythemanufacturer
maycauseariskofinjurytopersons.
• Whenblendinghotliquids,removecenterpieceoftwo-piececover.
• Donotattempttoreplaceorspliceadamagedcord.
Food Processor Accessory Additional Precautions
•Becertaincoverissecurelylockedinplacebeforeoperatingtheappliance.
•Donotattempttodefeatthecoverinterlockmechanism.
•Neverinsertfoodbyhand.Alwaysusefoodpusher.
•Keephandsandutensilsawayfrommovingbladesordiscswhileprocessingfoodto
reducetheriskofsevereinjurytopersonsordamagetothefoodprocessor.Ascraper
maybeusedbutmustbeusedonlywhenthefoodprocessorisnotrunning.
•Toreducetheriskofinjury,neverplacecuttingbladeordiscsonbasewithoutrst
puttingbowlproperlyinplace.
SAVE THESE INSTRUCTIONS
This product is for household use only.
• Themaximumratingmarkedontheproductisbasedontheattachmentthatdraws
thegreatestload.Otherattachmentsmaydrawlesspower.
Power Cord Instructions:
• Thisapplianceisequippedwithapolarizedplugfor120Vand127Vunitsonly.
Thistypeofplughasonebladethatiswiderthantheother.Thisplugwilltina
polarizedoutletonlyoneway.Thisisasafetyfeatureintendedtohelpreducethe
riskofelectricalshock.Ifyouareunabletoinserttheplugintotheoutlet,contact
aqualiedelectriciantoreplacetheobsoleteoutlet.Donotattempttodefeatthe
safetypurposeofthepolarizedplugbymodifyingthepluginanyway.
• Trytopositiontheblendernearthepowersourcetoreducethehazardsassociated
withpowercords(suchasbecomingentangledortrippingoveralongpowercord).
• Donotpull,twistorotherwiseabusethepowercord.
• Donotwrapthepowercordaroundthemainbodyoftheblenderduringorafter
use.
• Donotuseanextensioncordwiththisproduct.
This symbol has been placed in specific areas of the User Guide portion of
this book. Its purpose is to help you easily identify instructions that require
your special attention.
BLSTMB_16ESM1.indd 2-3 5/18/16 11:40 AM