User’s Manual URM01 1 of 12
of 12
FCC information FCC notice "Declaration of Conformity Information" This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
IC Statement This UWB RF apparatus complies with Canadian RSS-GEN. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
EU Limitations This device may not be installed into road or rail vehicles. This product is sold to all CE countries. BE GE CZ DK DE EE IE EL ES FR HR IT CY LV LT LU HU MT NL AT PL PT RO SI SK FI SE UK Declaration of conformity We, OSSTEM IMPLANT Co., Ltd. 2 Floor, B-dong, 51, Mayu-ro 238beon-gil, Siheung-si, Gyeonggi-do, 15079, Republic of Korea declare under our sole responsibility that our product.
CONTENT 1. Summaries ...................................................................................................................................................................................... 7 1.1 UWB RF module applications ......................................................................................................................................... 7 1.2 Interface signals .............................................................................................................
1. Summaries 1.1 UWB RF module applications This is the UWB module for OEM usage in the application of high speed data transmission. This module is one side component compact module which can be put on the any PCB board. This module is used primarily inside devices as like set-top box, wireless monitor or A/V receiver box for wireless connection of A/V signal and data line as like USB signal. 1.2 Interface signals This module is based on USB 2.0 interface.
3. HARDWARE SPECIFICATIONS 3.1 GENERAL Wireless circuit compatible with IEEE 802.15.3a standard and provide maximum speeds up to 480 Mbps. 3.2 PRODUCT CHACTERISTICS URM01 is designed for UWB module product as device side. It provides the fast data transmission between user and UWB module device via wireless network. The device is intended for use in a wide range of system types with extensive communication and connectivity requirements.. Radio technology: Compliance with 802.15.
4. HARDWARE REQUIREMENTS 4.
4.2 AL6301/AL5100 CHIPSET ARCHITECTURE 4.
4.4 Current Consumption Maximum Current Consumption (mA) BG6 Mode Current Stand-by 160~280 Transmit Receive 250 270 5. DIMENSION INFORMATION 5.1 PCB DIMENSION PC B Di m ens i on ( W x L ): 4 1 x 16 m m, T hi ck n es s 1 .0 m m ± 0 .
6. Labeling Wireless USB Module Model URM01 Danbitech Co., Ltd. Manufacturer's name and address 120, Daeseong-ro 180beon-gil, Sangdang-gu, Cheongju-si, Chungcheongbuk-do, Korea Tel: +82-70-5129-5712 Osstem Implant Co., Ltd. Applicant's name and address 2 Floor, B-dong, 51, Mayu-ro 238beon-gil, Siheung-si, Gyeonggi-do, 15079, Republic of Korea Tel.
FCC MODULAR APPROVAL INFORMATION EXAMPLES for Manual This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Validity of using the module certification: In the event that these conditions cannot be met (for example certain laptop configurations or co‐ location with another transmitter), then the FCC authorization for this module in combination with the host equipment is no longer considered valid and the FCC ID of the module cannot be used on the final product.
