User's Manual

K-WLM-01 User Manual 6 of 13
1. Package Components
RF module
2. Summaries
2.1 ZIGBEE RF Module Applications
This is the ZIGBEE module for OEM usage in the application of wireless data transmission. This module is
compact module which can be put on the any PCB board. This module is used primarily inside devices as
like ZIGBEE System, Health Care, Industrial Control and Monitoring for wireless connection of digital signal
and data line as USART signal.
2.2 Interface Signals
This module is based on USART interface. Pins of connector have USART and GPIO signals and power.
GPIO signals can be programmed for debug interface line for device control. Power 3.3V is supplied to the
module. In the module, 3.3V is used for I/O part. The current consumption is about 30mA in active TX
mode.
2.3 Module Installation
. The mother board which is installed with the ZIGBEE module should have 1.25mm pitch (2x10 pins)
Connector parts.