User's Manual

Validityofusingthemodulecertification:
In the event that these conditions cannot be met (for example certain laptop configurations or co‐
locationwithanothertransmitter),thentheFCCauthorizationforthismoduleincombinationwiththe
hostequipmentisnolongerconsideredvalidandtheFCCIDofthemodulecannotbeusedonthefinal
produ
ct. In these circumstances, the OEM integrator will be responsible for re‐evaluating the end
product (including the transmitter) and obtaining a separate FCC authorization. In such cases, please
involve a FCC ce rtification specialist in order  to determine if a Permissive Class II Change or new
Certificationisrequired.

UpgradeFirmware:
ThesoftwareprovidedforfirmwareupgradewillnotbecapabletoaffectanyRFparametersascertified
fortheFCCforthismodule,inordertopreventcomplianceissues.

Endproductlabeling:
Thistransmittermodule is auth orized only for usein devicewhere theantenna may beinstalled such
that20cmmaybemaintainedbetweentheantennaandusers.Thefinalendproductmustbelabeledin
avisibleareawiththefollowing:“ContainsFCCID:2ASB7K-WLM-01”.

Informationthatmustbeplacedintheendusermanual:

TheOEMintegratorhastobeawarenottoprovideinformationtotheenduserregardinghowtoinstall
orremovethisRFmoduleintheuser'smanualoftheendproductwhichintegratesthismodule.The
endusermanualshallincludeallrequiredregulatoryinformation/warningasshowinthismanual.