User's Manual

- 5 -
Cota WPT System User Manual 5 Specification
5 SPECIFICATION
5.1 COTA TX203 POWER SOURCE
6SUPPORT
Technical support for Ossia products can be initiated through the following methods:
Website contact form: https://www.ossia.com/contact/
Telephone: [phone]
Running TPS Multiple rings (magenta color on the power
transmitters) and light patterns moving
quickly in circle
The system is delivering power to power receivers.
Identifying Solid green color ring flashing every second Users can use the Cota DTU to locate the power
transmitter. Upon clicking Identify Transmitter in
the Cota DTU, the light ring will flash for at least 15
seconds (configurable duration); this capability
allows users to associate the Cota DTU with the
physical power transmitter.
Error/Over temp Solid red color ring flashing every second The power transmitter has encountered an error
and cannot continue without intervention. All
critical errors will force the power transmitter to
enter this state. Users should check the power
transmitter log and power transmitter temperature
for more information about the error.
The log files can be viewed in the Cota DTU window.
Item Description
Modulation Power: Continuous Wave (CW) Signal
Data: IEEE 802.15.4
Frequency 2.4 GHz to 2.5 GHz
Power Field 60° from the front of the Cota Tx203 power source, horizontally and vertically to a
maximum distance of 1 meter
Operating Temperature 10° C to 40° C
Environment Indoor use only
Mounting Wall, ceiling, or table-top mounting
Power 120 VAC
(Continued)
State Light Ring Color Pattern Description