User's Manual

- 3 -
Cota WPT System User Manual 1 Product Description
COTA WIRELESS POWER TRANSFER SYSTEM USER MANUAL
1PRODUCT DESCRIPTION
The Cota® Wireless Power Transfer system (Cota WPT system) transmits power by using radio waves in the 2.4 GHz
Industrial, Scientific, and Medical (ISM) band defined by the FCC. The Cota WPT system constantly communicates
with the Cota Wireless Power Transfer Client (Cota WPT client) to identify paths along which power can be
delivered, and sends power along these paths. Power may be delivered up to a maximum distance of 1 meter from
the front of the Cota Tx203 Power Source (Cota Tx203 power source).
The Cota WPT client is designed to receive RF power from a Cota Tx203 power source and may be used to provide
stable power to a variety of devices through its 5 V USB port. The Cota WPT client may be placed on a table-top or
mounted on a wall or other stable surface.
2SET-UP
If the Cota Tx203 power source can be installed on a wall or suspended from the ceiling. Installation should be
performed by qualified contractors and electricians. Such installations must ensure adequate ventilation
around the rear panel of the Cota Tx203 power source. For tabletop use, place the Cota Tx203 power source
in the provided table stand. A VESA mount may be used to secure the Cota WPT source to a stand or wall.
Ensure that the Cota Tx203 power source is secured and cannot fall. Avoid tripping hazards by ensuring
proper placement of the AC power cable or the Ethernet cable, when powering through power-over-Ethernet
(PoE).
The Cota WPT client shall be placed within 1 meter of the front of the Cota Tx203 power source and at no
more than a 60° offset from the front of the Cota Tx203 power source.
3OPERATING THE COTA TX203 POWER SOURCE AND COTA WPT CLIENT
Plug the Cota Tx203 power source into an AC wall outlet and apply power. The light ring on the Cota Tx203
power source should illuminate, changing colors slowly and continuously while the Cota Tx203 power source
is initializing. For light ring colors and their meanings, see Section 4, Light Ring Status.
3.1 PERFORM POWER NETWORK CHECK
1. Connect to the Cota Tx203 power source by using the internal Wi-Fi™ hot spot (preferable) or the
company’s LAN network and Cota power transmitter’s Ethernet.
2. Log in to the Cota Desktop Utility (Cota DTU) interface by using the power transmitter’s Wi-Fi, for example
Tile_51 with ossiawifi as the password.