Installation Guide

- 3 -
Co
ta WPT Client Installation Guidelines
SYSTEM CONFIGURATION AND CALIBRATION
The following steps should be completed each time a system is installed:
After the Cota WPT source and Cota WPT client are securely installed, perform these steps:
1. Insert a small screwdriver to depress the Reset button on the Cota WPT client as shown in Figure 3.
2. Log in to the Cota Web Admin as described in the
DC-1145_Ossia_Cota_Wireless_Power_Transfer_System_UserManual.
3. Push the Initialize button on the Cota Web Admin, while the area between the Cota WPT source and Cota
WPT client is free of any obstruction.
4. The system is now ready for use, and the Cota WPT client will be charging.
Figure 3 Reset Button Location on the Cota Wireless Power Transfer Client
Reset Button