Installation Guide
Table Of Contents
- 2 -
Co
ta WPT Client Installation Guidelines
COTA WIRELESS POWER TRANSFER CLIENT INSTALLATION GUIDELINES
The Cota® Wireless Power Transfer Client (Cota WPT client) must be professionally installed by an
Ossia®-authorized technician according to the following conditions:
The Cota WPT client should be installed in:
• Indoor locations only.
• Commercial, industrial or other non-residential locations only.
• In a fixed location only.
Appropriate mounting hardware should be used to securely attach the Cota WPT client to a wall, ceiling,
tabletop, or other fixed location through the mounting socket shown in Figure 1. Note that the Cota WPT
source must not be operational during installation.
Figure 1 Cota Wireless Power Transfer Client Mounting Socket
In order to receive power, the Cota WPT client must be installed within the power transfer area, which is a
1 meter radius from the front and edges of the Cota WPT source and within an angle of up to 60° from the
front of the Cota WPT source, as shown in Figure 2.
Figure 2 Cota Wireless Power Transfer System Power Delivery Region