User Manual
Table Of Contents
- OSS-KIT-EXP-6002
- Table of Contents
- 1 Overview
- 2 Component Identification
- 3 Installation Instructions
- 4 Technical Information
- 4.1 Signal Adjustment
- 4.2 Pin Assignments
- 4.3 Pin-out for the PCIe x4 Card Edge Connector on the “Host Cable Adapter”
- 4.4 PCI Express x4 Connector PIN Assignment
- 4.5 Pin-out for the PCIe x4 Cable
- 4.6 Signal Descriptions
- 4.7 Connector Pin-outs for the PCIe x4 Cable Connector
- 4.8 PCI Express x4 Connector PIN Assignment
- 5 Contacting Technical Support
- 6 Returning Merchandise to One Stop Systems
One Stop Systems
OSS-KIT-EXP-6002| 7
2 Component Identification
2.1 Host cable adapter card
The PCIe x4 expansion kit contains two cable adapter boards, the host cable adapter and the target cable adapter. The host adapter inserts into
the host computer’s PCIe x4, x8 or x16 slot.
Cable LED indicators are the same for both Host and Target configurations.
2.2 Expansion Link Board
The Expansion Link Board (ELB) OSS-CPCIe3-3U/6U-ELB-x4 is a downstream link board that installs into a CPCIe chassis. The ELB fits into the
system slot of a CPCIe backplane. The ELB is the downstream link board and the primary fan-out switch to support multiple configurations of
CPCI or CPCIe expansion slots.