User Manual
Table Of Contents
- OSS-KIT-EXP-6002
- Table of Contents
- 1 Overview
- 2 Component Identification
- 3 Installation Instructions
- 4 Technical Information
- 4.1 Signal Adjustment
- 4.2 Pin Assignments
- 4.3 Pin-out for the PCIe x4 Card Edge Connector on the “Host Cable Adapter”
- 4.4 PCI Express x4 Connector PIN Assignment
- 4.5 Pin-out for the PCIe x4 Cable
- 4.6 Signal Descriptions
- 4.7 Connector Pin-outs for the PCIe x4 Cable Connector
- 4.8 PCI Express x4 Connector PIN Assignment
- 5 Contacting Technical Support
- 6 Returning Merchandise to One Stop Systems
One Stop Systems
OSS-KIT-EXP-6002| 5
1.3 Specifications
1.3.1 Host Adapter
PCIe x4 Host Cable Adapter Card (SKU : OSS-PCIe-HIB25-X4-H)
Form Factor PCIe x4 add-in card
Dimension (H x L) 2.7” x 3.1” (68 x 78mm)
Front Panel Connectors One PCIe x4 cable connectors
Front Panel Indicators Power ON / Cable Present LED
Red-drivers Pericom P12EQX5804
Temperature Range 0° to 50°C (32° to 122°F)
Relative Humidity 10 to 90% non-condensing
Shock 30g Acceleration peak (11 ms pulse)
Vibration 5-17 Hz 0.5” double amplitude displacement; 7-2000Hz, 1.5g acceleration
Power Consumption 3.75W typical, 3.3@1.3A
Agency Compliance UL60950, FCC Class B, CE safety and emissions, ROHS
Redriver Pericom P12EQX5804
1.3.2 Expansion Link Board
PCIe x4/x8 Gen2 Expansion Link Board (SKU : OSS-SHB-G2-x8-x4)
Form Factor PCIMG EXP.system slot compliant. Single Slot
Slot Type System slot for the expansion chassis
Dimension (H x L) 3.937 x 6.299 in (100 x 160 mm), 1 slot wide
Switch PLX PEX8733 32 lane switch
Upstream Interface
x4 PCI Express over cable
PCI-SIG PCI Express Cable Rev 2.0 Compliant
Downstream Interface
16 lanes of PCI Express on the backplane connectors.
The lanes form two or four links to the backplane through the XP2 and XP3
connectors per the PICMG EXP.0 specification.
The following link modes are automatically selected by the backplane as follows:
• Two link mode: 2 x8 links (per backplane capabilities)
• Four link mode: Four x4 PCIe links
Front Panel Connectors 1 PCIe x4 Cable (Molex : 75586-0010)
Front Panel Indicators
4 backplane link-active indicators (green)
2 or 4 link mode + cable link (green)
Power Consumption 10W typical +12V @ .5, 3.3V @ 1.25A, 5Vaux @ 2.5mA
Temperature Range 0° to 50°C (32° to 122°F)
Relative Humidity 10 to 90% non-condensing
Storage Temperature -40° to 85°C (-40°-185°F)
Shock 30g acceleration peak (11ms pulse)
Vibration 5-17 Hz 0.5” double amplitude displacement; 7-2000Hz, 1.5g acceleration
Agency Compliance UL60950, FCC Class B, CE safety and emissions, ROHS